QUALITY CATEGORY A & CATEGORY B FACTORY

Cryptorchidism is a condition in male cats where one or both testicles fail to descend into the scrotum. The term cryptorchidism comes from the Greek words kryptos, meaning “hidden,” and orchis, meaning “testicle.”   Normally, the testes develop near the kidneys within the abdomen and descend into the scrotum by two months of age. In some cats, this may occur later but rarely after six months of age. If the testicles cannot be felt in the scrotum after two to four months of age, cryptorchidism may be suspected.   In most cases, the undescended testicle is retained in the abdomen or in the inguinal canal, which is the passage through the abdominal wall into the genital region. Sometimes, the testicle may be located just under the skin in the groin region between the inguinal canal and the scrotum.   If the testicle is retained in the abdomen, it cannot be felt from the outside. An abdominal ultrasound or radiographs may be used to determine its exact location but this is not often done before surgery. Typically, only one testicle is retained, known as unilateral cryptorchidism. If a cat does not appear to have testicles but exhibits male behaviors, a hormonal test called an hCG stimulation test can be done to see if he has already been neutered. Alternatively, a veterinarian can check for penile spines which disappear six weeks after neutering.   Cryptorchidism affects less than 2% of cats and may be more common in purebred or pedigreed cats such as Persians, Himalayans, and Ragdolls. It appears to be inherited but its exact cause is not fully understood. The most common signs of cryptorchidism are male marking behavior (spraying), male cat-associated odors, and aggression. Cats have fewer incidences of testicular cancer and complications associated with cryptorchidism than dogs. One complication is spermatic cord torsion (twisting onto itself) which can cause sudden and severe abdominal pain.   The treatment for cryptorchidism is castration of both testes even if only one has not descended. Surgery involves making an incision into the abdomen or inguinal canal to locate and remove the retained testis. In summary, cryptorchidism is a condition where one or both testicles fail to descend into the scrotum. It can be diagnosed through physical examination or imaging techniques such as ultrasound or radiographs. The exact cause of cryptorchidism is not fully understood but it appears to be inherited. Treatment involves castration of both testes.   About Surgsci Surgsci Medical Ltd. aims to improve people's health and quality of life. We adhere to the mission of independent research and development, popularize minimally invasive medical technology, and share high-quality humanistic care. Through clinical practice, we innovate in technology to benefit patients, medical staff, and medical institutions. We provide holistic innovative solutions for hepatobiliary and gastrointestinal surgery, ENT surgery, colorectal surgery, bariatric surgery, oncology, urology, thoracic surgery, women's and children's surgery, neurosurgery, etc. We are in Shenzhen, Guangdong. Founded in 2017, Surgsci is a national high-tech enterprise, focusing on the innovation for smart consumables for minimally invasive surgery. We are specialized in the production of laparoscopic surgical instruments, including disposable laparoscopic trocars and ultrasonic scalpels etc. We own two factories in Pingshan and Bao’an District, a total of about 1500 square meters of R&D office and 4000 square meters of GMP clean workshop with ISO13485. We integrate design, R&D, manufacturing, and sales. At present, we have more than 40 authorized patents at home and abroad. The products have obtained CE & FDA and are sold to nearly 30 countries in Europe, Asia, the Middle East, and South America. We Provide high quality OEM and ODM services which are recognized and favored by our customers. Looking forward to your inquiry and cooperation.

Laparoscopic pelvic dissection is a surgical technique that uses a laparoscope to see inside your body without making large incisions in the skin. The laparoscope is a thin, telescopic rod with a camera at the end that is inserted through small incisions in the abdomen. This technique is used for various purposes such as removing tumors or cysts, treating endometriosis, and performing hysterectomies.   Laparoscopic pelvic dissection has several advantages over traditional open surgery. It causes less pain and scarring, has a shorter recovery time, and allows patients to return to their normal activities more quickly. However, it also has some risks such as bleeding, infection, and damage to nearby organs.   The surgery is usually performed under general anesthesia. During the surgery, the laparoscope transmits images of the inside of the abdomen to a video monitor in the operating room. The surgeon then uses specialized instruments to perform the surgery while watching the monitor.

1: Can the line connecting the jaw and the main body be used permanently without being replaced? Yes, it can be used permanently.   2. How much can you generally use (number of times or period) when you purchase a Jaw once? It mainly depends on the doctor’s technique and proficiency in using the ultrasonic scalpel. Doctors who are familiar with the ultrasonic scalpel can usually use it dozens or even hundreds of times, but for a doctor who is not familiar with the use of ultrasonic scalpel, it may be damaged after only one or two uses. The white gasket has a high breakage rate, which can be repaired.   3. Is it possible to autoclave sterilize the Jaw? High temperatures may damage the internal parts of the jars and are generally not recommended. Immersion cleaning and plasma disinfection are mainly recommended.   4. If autoclave sterilization is impossible, how is sterilization generally performed? The veterinary hospital cannot use the jaw once and throw it away. Use immersion cleaning for disinfection. Soak the area in contact with the tissue, not the entire product.   5. Advantages and disadvantages of the product compared to Harmonic Harmonic does not have a pet-specific machine, and its algorithm design is not for pet surgery. SurgSci pet ultrasonic scalpel is specially designed for pets. Its control algorithm is regulated by thousands of pet tissue cuts, which can bring more suitable results for pet tissue cutting and coagulation. Harmonic does not have brand new pet application products, and they are all used products, with insufficient product stability and after-sales service guarantee. The main functions and performances of our products and Harmonic have been tested on animals, and there is no statistical difference in the experimental results.   6. The Harmonic generates heat of about 50 degrees. How hot is it? According to our tests, the jaw temperature of the Harmonic is much higher than 50°C. For specific comparison data, please refer to the figures below. The imported brand refers to the product of Harmonic.    

Bladder stones are mineral formations that develop in the bladder. These mineral formations can be caused by a variety of factors including diet, genetics, and urinary tract infections. The time it takes for bladder stones to form can vary depending on the cat’s diet and other factors. Some cats may develop bladder stones within a few weeks or months while others may take years.   The most common signs of bladder stones in cats are blood in the urine (called hematuria) and straining to urinate (called dysuria). Hematuria is caused by the stones rubbing against the bladder wall, irritating, and damaging the tissues. Dysuria is caused by the stones obstructing the urethra, making it difficult for your cat to urinate. Small stones may flow with the urine into the narrow urethra, where they become lodged and cause an obstruction. This problem occurs more frequently in male cats, because their urethra is much longer and narrower than that of female cats. If an obstruction occurs, the bladder cannot be emptied fully. This condition is an emergency, and is very painful, especially when left untreated.   Diagnosis of bladder stones is usually done through radiographs and a microscopic exam of urine. Radiographs can help identify the size and location of the stones while a microscopic exam of urine can help identify any underlying infections or crystals that may be contributing to stone formation. Treatment options include surgery or a special diet that can help dissolve the stones. Surgery may be necessary if your cat has a large stone or if there is a complete obstruction of the urethra. A special diet that is low in minerals that can contribute to stone formation can help dissolve small stones and prevent new ones from forming.  

Colon cancer is a type of cancer that begins in the large intestine (colon). The colon is the final part of the digestive tract. Colon cancer typically affects older adults, though it can happen at any age.   Treatment for colon cancer usually involves surgery to remove the cancer. Other treatments, such as radiation therapy and chemotherapy, might also be recommended.   Today, doctors use two approaches for colon cancer surgery: Open surgery and minimally invasive surgery. Open surgery is the conventional approach, using an abdominal incision, and may require a longer hospital stay. Minimally invasive surgery is performed using laparoscopic or robotic tools, this surgery requires a smaller incision and allows for a quicker recovery.   The ultrasonic scalpel is a surgical instrument that uses ultrasonic energy to cut and coagulate tissue. It is used in colon cancer surgery to remove the cancerous part of the colon while cutting through the tissue and sealing blood vessels at the same time. The use of an ultrasonic scalpel has several advantages including less bleeding, less pain, and faster recovery time.   SurgSci ultrasonic scalpel has the following advantages: 1. Reduce adhesion, eschar, and smoke, and obtain a clear surgical field of vision. 2. It integrates separation, cutting and coagulation to save operation time. 3. One operation can cut and coagulate blood vessels or tissue bundles with a diameter of 5mm. 4. The operation efficiency is higher, the speed is faster, the trauma is small, and the hemostatic effect is good.     About Surgsci Surgsci Medical Ltd. aims to improve people's health and quality of life. We adhere to the mission of independent research and development, popularize minimally invasive medical technology, and share high-quality humanistic care. Through clinical practice, we innovate in technology to benefit patients, medical staff, and medical institutions. We provide holistic innovative solutions for hepatobiliary and gastrointestinal surgery, ENT surgery, colorectal surgery, bariatric surgery, oncology, urology, thoracic surgery, women's and children's surgery, neurosurgery, etc. We are in Shenzhen, Guangdong. Founded in 2017, Surgsci is a national high-tech enterprise, focusing on the innovation for smart consumables for minimally invasive surgery. We are specialized in the production of laparoscopic surgical instruments, including disposable laparoscopic trocars and ultrasonic scalpels etc. We own two factories in Pingshan and Bao’an District, a total of about 1500 square meters of R&D office and 4000 square meters of GMP clean workshop with ISO13485. We integrate design, R&D, manufacturing, and sales. At present, we have more than 40 authorized patents at home and abroad. The products have obtained CE & FDA and are sold to nearly 30 countries in Europe, Asia, the Middle East, and South America. We Provide high quality OEM and ODM services which are recognized and favored by our customers. Looking forward to your inquiry and cooperation.

Who are we? SurgSci is a leading manufacturer of disposable laparoscopic instruments based in Shenzhen, China. We specialize in the production of laparoscopic surgical instruments, including disposable laparoscopic trocars and ultrasonic scalpels. SurgSci integrates design, R&D, manufacturing and sales. We have obtained CE & FDA and sold to nearly 30 countries in Europe, Asia, Middle East, and South America. SurgSci is looking for laparoscopic instruments’ distributors to form a lasting partnership.   SurgSci offers the following: High quality products Economic prices Wide variety of product lines OEM and ODM services Full range of certificates Strong product capacity On-time delivery R&D technical support Great after-sales service   Who are we looking for? SurgSci is looking for professional distributors who can cooperate with us for a long time and are committed to selling their products. We looks forward to working with you to bring our products and technologies to more people and lead a healthier life. By becoming SurgSci’s distributor, you can help bring our high-quality products and technologies to more people around the world. You can also help improve people’s health by providing with the best possible surgical instruments. If you are interested in becoming SurgSci’s distributor, you can check our product information and contact us to get samples. After further discussion, you can sign the distribution agreement and order the product.   To become SurgSci’s distributor, you can follow these steps: 1. Check SurgSci’s product information. 2. Contact SurgSci. 3. Get samples. 4. Further discuss with SurgSci. 5. Sign the distribution agreement. 6. Order the product.   About Surgsci Surgsci Medical Ltd. aims to improve people's health and quality of life. We adhere to the mission of independent research and development, popularize minimally invasive medical technology, and share high-quality humanistic care. Through clinical practice, we innovate in technology to benefit patients, medical staff, and medical institutions. We provide holistic innovative solutions for hepatobiliary and gastrointestinal surgery, ENT surgery, colorectal surgery, bariatric surgery, oncology, urology, thoracic surgery, women's and children's surgery, neurosurgery, etc. We are in Shenzhen, Guangdong. Founded in 2017, Surgsci is a national high-tech enterprise, focusing on the innovation for smart consumables for minimally invasive surgery. We are specialized in the production of laparoscopic surgical instruments, including disposable laparoscopic trocars and ultrasonic scalpels etc. We own two factories in Pingshan and Bao’an District, a total of about 1500 square meters of R&D office and 4000 square meters of GMP clean workshop with ISO13485. We integrate design, R&D, manufacturing, and sales. At present, we have more than 40 authorized patents at home and abroad. The products have obtained CE & FDA and are sold to nearly 30 countries in Europe, Asia, the Middle East, and South America. We Provide high quality OEM and ODM services which are recognized and favored by our customers. Looking forward to your inquiry and cooperation.

A total hysterectomy is a surgical procedure that removes the uterus and cervix (neck of the womb). It is usually performed to treat conditions such as cancer of the uterus, cervix or ovaries, endometriosis, uterine fibroids, heavy or painful periods, prolapse of the uterus or cervix, chronic pelvic pain or adenomyosis.   The surgery can be done through an incision in the abdomen (abdominal hysterectomy), through the vagina (vaginal hysterectomy), or using laparoscopic surgery (keyhole surgery). The type of surgery depends on the reason for surgery and how much of your womb and reproductive system can safely be left in place.   The procedure is usually performed under general anesthesia and takes about 1-2 hours. After surgery, you can’t become pregnant and no longer menstruate. Recovery usually takes four to six weeks, depending on the type of surgery you have.   Total laparoscopic hysterectomy with the ultrasonic scalpel is feasible and safe. It offers not only cosmetic benefits but also reduces the need for analgesia and the time to return to normal gastrointestinal function in comparison with conventional abdominal hysterectomy.   The ultrasonic scalpel is a surgical instrument that uses high-frequency sound waves to cut and coagulate tissue during surgery. It has several advantages over traditional surgical instruments such as less blood loss, less pain, less scarring, shorter hospital stay, faster recovery time and fewer complications.

Traditional scalpels and ultrasonic scalpels are both used in veterinary surgery. However, there are differences between the two.   Traditional scalpels are sharp and can make precise incisions. They are also relatively inexpensive and easy to use. However, if not used properly, they can cause tissue damage and bleeding.   On the other hand, ultrasonic scalpels use high-frequency sound waves to cut through tissue. They are more expensive than traditional surgery knives but offer several advantages. Ultrasonic scalpels can cut through tissue without causing damage or bleeding. They also produce less heat than traditional surgery knives, which can help reduce the risk of tissue damage.   Additionally, ultrasonic scalpels can cut through bone tissue, which is not possible with traditional surgery knives. This makes them useful for orthognathic surgery.   In conclusion, both traditional scalpels and ultrasonic scalpels have their advantages and disadvantages when it comes to veterinary surgery. The choice of instrument depends on the type of surgery being performed and the surgeon’s preference.   Contact Us: Email: service@surgsci.com Website: www.surgscience.com

Large Size Clip Applier   Titanium Clip Applier Laparoscopic Clip Applicator   Surgsci disposable laparoscopic ligating clip applier is used to occlude blood vessel and other tissue structures in endoscopic surgery. It can be used in many types of minimally invasive surgical procedures to handle occlusion. It is a single-use instrument to avoid cross-infection.   Contact Us: Email: service@surgsci.com Website: www.surgscience.com   About Surgsci Surgsci Medical Ltd. aims to improve people's health and quality of life. We adhere to the mission of independent research and development, popularize minimally invasive medical technology, and share high-quality humanistic care. Through clinical practice, we innovate in technology to benefit patients, medical staff, and medical institutions. We provide holistic innovative solutions for hepatobiliary and gastrointestinal surgery, ENT surgery, colorectal surgery, bariatric surgery, oncology, urology, thoracic surgery, women's and children's surgery, neurosurgery, etc. We are in Shenzhen, Guangdong. Founded in 2017, Surgsci is a national high-tech enterprise, focusing on the innovation for smart consumables for minimally invasive surgery. We are specialized in the production of laparoscopic surgical instruments, including disposable laparoscopic trocars and ultrasonic scalpels etc. We own two factories in Pingshan and Bao’an District, a total of about 1500 square meters of R&D office and 4000 square meters of GMP clean workshop with ISO13485. We integrate design, R&D, manufacturing, and sales. At present, we have more than 40 authorized patents at home and abroad. The products have obtained CE & FDA and are sold to nearly 30 countries in Europe, Asia, the Middle East, and South America. We Provide high quality OEM and ODM services which are recognized and favored by our customers. Looking forward to your inquiry and cooperation.    

Luxating patella means the kneecap moves out of place when the knee bends. It is usually something dogs are born with. A luxating patella can go inside or outside the leg when it pops out of the groove in the thighbone. The kneecap should stay in a groove at the end of the femur. When a dog’s knee moves, the kneecap goes up and down in this groove. But sometimes the kneecap slips out (luxates) in some dogs. Most of the time, a luxating patella in dogs goes inside, or toward the other back leg.   Some dogs have this problem more often or worse than others. Dogs with a luxating patella may walk or run fine, then suddenly lift a back leg for a few steps. Dogs with a bad case may need pain medicine, joint help, or surgery. Sometimes a luxating patella can get better with exercise and medicine.     About Surgsci Surgsci Medical Ltd. aims to improve people's health and quality of life. We adhere to the mission of independent research and development, popularize minimally invasive medical technology, and share high-quality humanistic care. Through clinical practice, we innovate in technology to benefit patients, medical staff, and medical institutions. We provide holistic innovative solutions for hepatobiliary and gastrointestinal surgery, ENT surgery, colorectal surgery, bariatric surgery, oncology, urology, thoracic surgery, women's and children's surgery, neurosurgery, etc. We are in Shenzhen, Guangdong. Founded in 2017, Surgsci is a national high-tech enterprise, focusing on the innovation for smart consumables for minimally invasive surgery. We are specialized in the production of laparoscopic surgical instruments, including disposable laparoscopic trocars and ultrasonic scalpels etc. We own two factories in Pingshan and Bao’an District, a total of about 1500 square meters of R&D office and 4000 square meters of GMP clean workshop with ISO13485. We integrate design, R&D, manufacturing, and sales. At present, we have more than 40 authorized patents at home and abroad. The products have obtained CE & FDA and are sold to nearly 30 countries in Europe, Asia, the Middle East, and South America. We Provide high quality OEM and ODM services which are recognized and favored by our customers. Looking forward to your inquiry and cooperation.  

Our trocars are sold to various countries around the world. Customers have unanimous praise for our products. Among them, Dana from Palestine left a message for us: I was really impressed with the quality of the instruments and the great service provided. We have a strong technical team and perfect after-sales process. When customers encounter problems or seek help, we will provide customers with support and solutions as soon as possible. Clients from Turkey fully appreciate our team and say: We enjoy doing business with such a supportive team like yours.   In addition to trocar products, our ultrasonic scalpel system is also sold overseas. Dr. Serpa from Bolivia bought our ultrasonic scalpel and says: I’m really happy with them, such a great product. They work excellent with my generator; I was waiting to use on surgery to send you a video. We not only have high-quality products, but also have extremely high-cost performance. In our Trocar product line, there are different sizes and quantities of Trocar kits to choose from, which can match various procedures for different purposes. A very satisfied customer from the Philippines said: good product, 2 in 1 trocar so economical. We will continue to work hard to bring better products and services to our customers.   About Surgsci Surgsci Medical Ltd. aims to improve people's health and quality of life. We adhere to the mission of independent research and development, popularize minimally invasive medical technology, and share high-quality humanistic care. Through clinical practice, we innovate in technology to benefit patients, medical staff, and medical institutions. We provide holistic innovative solutions for hepatobiliary and gastrointestinal surgery, ENT surgery, colorectal surgery, bariatric surgery, oncology, urology, thoracic surgery, women's and children's surgery, neurosurgery, etc. We are in Shenzhen, Guangdong. Founded in 2017, Surgsci is a national high-tech enterprise, focusing on the innovation for smart consumables for minimally invasive surgery. We are specialized in the production of laparoscopic surgical instruments, including disposable laparoscopic trocars and ultrasonic scalpels etc. We own two factories in Pingshan and Bao’an District, a total of about 1500 square meters of R&D office and 4000 square meters of GMP clean workshop with ISO13485. We integrate design, R&D, manufacturing, and sales. At present, we have more than 40 authorized patents at home and abroad. The products have obtained CE & FDA and are sold to nearly 30 countries in Europe, Asia, the Middle East, and South America. We Provide high quality OEM and ODM services which are recognized and favored by our customers. Looking forward to your inquiry and cooperation.

What is a Pyeloplasty Pyeloplasty refers to cutting the expanded renal pelvis wall after the obstruction of the ureteropelvic junction is relieved, and then suturing the cut renal pelvis wall to the cut ureter to restore the continuity of the ureter. The purpose of the operation is to make the shaped ureteropelvic junction at the lowest point of the renal pelvis and fully drain the urine from the renal pelvis. There are two surgical methods: disconnected and non-disconnected, and are mainly used to treat ureteropelvic junction obstruction.

Abdominal Wall Fixation Device Abdominal wall fixation device designed to adjust the depth of the cannula. Blunt Obturator Tip Blunt and rounded obturator tip reduce puncture injuries. Large-Flow Valve Design Large-flow main steam valve design can establish pneumoperitoneum faster and make abdominal pressure more stable. Movable Sealing Air Valve The movable sealing air valve structure ensures good airtightness when the instrument enters. About Surgsci Surgsci Medical Ltd. aims to improve people's health and quality of life. We adhere to the mission of independent research and development, popularize minimally invasive medical technology, and share high-quality humanistic care. Through clinical practice, we innovate in technology to benefit patients, medical staff, and medical institutions. We provide holistic innovative solutions for hepatobiliary and gastrointestinal surgery, ENT surgery, colorectal surgery, bariatric surgery, oncology, urology, thoracic surgery, women's and children's surgery, neurosurgery, etc. We are in Shenzhen, Guangdong. Founded in 2017, Surgsci is a national high-tech enterprise, focusing on the innovation for smart consumables for minimally invasive surgery. We are specialized in the production of laparoscopic surgical instruments, including disposable laparoscopic trocars and ultrasonic scalpels etc. We own two factories in Pingshan and Bao’an District, a total of about 1500 square meters of R&D office and 4000 square meters of GMP clean workshop with ISO13485. We integrate design, R&D, manufacturing, and sales. At present, we have more than 40 authorized patents at home and abroad. The products have obtained CE & FDA and are sold to nearly 30 countries in Europe, Asia, the Middle East, and South America. We Provide high quality OEM and ODM services which are recognized and favored by our customers. Looking forward to your inquiry and cooperation.

Dogs have become an integral part of our lives and many people consider them as family companions. Just like in human medicine, tumors are also a concern for pets. Once dogs suffer from tumors, it can seriously affect their health. Here are five common tumors in dogs:   1. Mast cell tumor This is one of the most common skin tumors in dogs, accounting for 16-21% of all skin tumors. Mast cells are a type of immune cell mainly associated with allergic reactions and inflammation. Its symptoms are similar to allergic reactions, such as redness and swelling of the surrounding skin, edema, increased vascular permeability leading to bleeding tendency, and may even cause symptoms such as gastric ulcer, hypotension and shock. It can easily be overlooked because its touch is similar to lipoma.   2. Lipoma Older Dogs are more prone to lipomas. This tumor occurs between the subcutaneous tissues and is basically a benign tumor. If the lipoma gradually grows, you can take some anti-tumor drugs, such as Zhongliu instant beef tablets, to inhibit tumor growth. If the lipoma is too large or ulcerated, try to go to the hospital for resection. If it is a malignant tumor, it can be treated according to the doctor’s advice.   3. Mammary Gland Tumors The ratio of benign to malignant tumors is 1:1, and most of them occur in dogs after 6 or 7 years old, and most of them occur in 8-10-year-old female dogs who have not been sterilized. Some studies have pointed out that sterilization before the first estrus reduces the incidence of breast tumors to 0.5%; sterilization after the second estrus, the incidence rate is 8%; sterilization after the third estrus, the incidence rate rises to 25%.     4. Lymphoma Lymphoma in dogs can occur in the lymph nodes, spleen and any other organ; however, multicentric lymphoma is the most common type. The initial symptoms are fever, loss of appetite, weight loss etc., which are relatively not obvious characteristics of the disease. Generally, when it is discovered, it is in the advanced stage of lymphadenopathy. Lymphoma is one of the few tumors that respond well to chemotherapy. If the dog undergoes chemotherapy in time, there is about 80%-95% chance for the tumor to regress, and 20%-25% of the dog can survive for 2 years; but without chemotherapy, the survival time may be shortened to 1-3 months.   5. Skin Squamous Cell Tumor This is a common disease in dogs and cats. Cats mainly occur on the head and nasal plane, while dogs often occur on the nasal plane, skin and between the toes.

During laparoscopic procedures and other minimally invasive surgeries (MIS), trocars are used to create small incisions in outer tissue layers. These incisions allow surgeons to insert cannulas through which surgical instruments can be introduced. To ensure optimal access to the operative field (in this case, the pelvis), trocars should be arranged in an arc. Laparoscopic surgery poke hole is the channel for implanting laparoscope and surgical instruments, which is equivalent to the incision of laparotomy, but the choice of poke hole placement is completely different from that of open surgery.   Choice of Puncture Point   1. Observation hole In terms of histological origin, the tissue structure at the umbilical foramen on the abdominal wall is the weakest, with few blood vessels, and its anatomical layers from outside to inside are skin, thin subcutaneous tissue, rectus abdominis tendon, posterior sheath, and parietal peritoneum. Therefore, the umbilical foramen is the most suitable site for blind punctures such as observation holes. For most laparoscopic operations, a puncture hole of 10 mm is often selected in the middle of the umbilical cord or slightly above or below the umbilical cord. If the umbilical foramen is too deep, or if thereis infection, you should choose below the umbilicus. If the pelvic mass is too large, supraumbilical puncture can also be selected.   2. Operating hole   The selection of the puncture point of the operation hole follows the principles of easy operation, aesthetics, and minimal trauma. At the same time, the inferior epigastric artery and other running vessels must be avoided, such as the superficial epigastric artery, deep circumflex iliac artery, and superficial circumflex iliac artery. The first operation hole: the observation hole. The second operation hole: the 1-2cm medial side of the left anterior superior iliac spine is the common puncture site. The third operation hole: at the McBurney point on the right. The fourth operation hole: The puncture point can generally be outside the midpoint of the connection between the observation hole and the second operation hole, and the distance from the above two operation holes is greater than 8-9cm. If necessary, for the convenience of operation, puncture can be done at any point on the abdominal wall.   Puncture method 1. Trocar direct insertion method Do not form pneumoperitoneum first, and insert Trocar directly. The technical requirements are relatively high and only suitable for experienced surgeons. 2. Direct-looking trocar puncture method After the skin is cut at the first Trocar, a laparoscope is inserted into the Trocar, and the incision of each layer of abdominal wall tissue can be observed under the microscope, thus ensuring the safety of the operation. 3. Closed Enter the Veress Veress needle, and then enter the first Trocar after the pneumoperitoneum is formed. This is a classic puncture mode and is most widely used in clinical practice. However, "blind puncture" can cause damage to retroperitoneal vessels, abdominal wall vessels, and gastrointestinal tract. 4. Open After incision of each layer of tissue in the umbilicus into the abdominal cavity, a blunt Trocar was inserted to form a pneumoperitoneum. It is time-consuming, and there is a possibility of air leakage due to the incision being too large. It is suitable for high-risk patients with a history of abdominal surgery or suspected abdominal adhesions, and can also be used for laparoscopic surgery during pregnancy.   Poke hole placement positions for different procedures 1. Laparoscopic appendectomy Poke a hole on the left side next to the umbilicus as an observation hole, poke a hole horizontally at the level of the navel at the outer edge of the right rectus abdominis as the main operation hole, and poke a hole at McBurney’s point as a secondary operation hole. Or poke a hole 2 cm medial to the left anterior superior iliac spine as the main operation hole, and poke a hole 2 cm above the pubic symphysis as the auxiliary operation hole. 2. Laparoscopic cholecystectomy Poke holes at the lower edge of the umbilical cord as observation holes, and poke holes under the xiphoid process, right midclavicular line, and right anterior axillary line as the main, auxiliary operation holes, and assistant auxiliary operation holes. 3. Laparoscopic liver lobectomy Poke a hole on the upper or lower border of the umbilicus to make an observation hole. The main operation hole is as close to the lesion as possible. If the lesion is in the right liver, take it under the xiphoid process; The auxiliary operation hole must be kept at a certain distance from the main operation hole and the lens. Generally, the subcostal margin of the right midclavicular line and the subcostal margin of the right anterior axillary line are used, and additional operation holes can be added according to the actual situation. 4. Laparoscopic hepatic cyst drainage Poke holes at the lower edge of the umbilicus as observation holes, and poke holes under the xiphoid process, at the level of the right midaxillary line at the level of the umbilicus, or below the costal margin of the right midclavicular line as the main and auxiliary operation holes, respectively. 5. Laparoscopic splenectomy Poke holes below the umbilical cord as observation holes, poke holes at the intersection of the left midclavicular line and umbilicus horizontal line as the main operation hole, poke holes about 3 cm above the umbilicus through the rectus abdominis line as auxiliary operation holes, and poke holes at the left anterior axillary line and below the spleen as secondary operations Auxiliary operating hole. 6. Laparoscopic tail pancreatectomy An observation hole is made below the umbilical cord at the lower edge of the umbilical cord, the main operating hole is made at a position 2 cm above and below the left midclavicular line and the umbilicus horizontal line, an auxiliary hole is made at a position about 8 cm above the umbilicus to the left of the right midclavicular line, and 2 cm below the costal margin of the right anterior axillary line As an assistant to operate the hole. 7. Laparoscopic duodenal ulcer perforation repair Poke holes at the lower edge of the umbilicus as observation holes, and poke holes 1 cm below the costal margin on the left anterior axillary line and at the level of the left midclavian line at the level of the umbilicus as the main and auxiliary operation holes, respectively, with a distance of about 1 cm between the two holes.     About Surgsci Surgsci Medical Ltd. aims to improve people's health and quality of life. We adhere to the mission of independent research and development, popularize minimally invasive medical technology, and share high-quality humanistic care. Through clinical practice, we innovate in technology to benefit patients, medical staff, and medical institutions. We provide holistic innovative solutions for hepatobiliary and gastrointestinal surgery, ENT surgery, colorectal surgery, bariatric surgery, oncology, urology, thoracic surgery, women's and children's surgery, neurosurgery, etc. We are in Shenzhen, Guangdong. Founded in 2017, Surgsci is a national high-tech enterprise, focusing on the innovation for smart consumables for minimally invasive surgery. We are specialized in the production of laparoscopic surgical instruments, including disposable laparoscopic trocars and ultrasonic scalpels etc. We own two factories in Pingshan and Bao’an District, a total of about 1500 square meters of R&D office and 4000 square meters of GMP clean workshop with ISO13485. We integrate design, R&D, manufacturing, and sales. At present, we have more than 40 authorized patents at home and abroad. The products have obtained CE & FDA and are sold to nearly 30 countries in Europe, Asia, the Middle East, and South America. We Provide high quality OEM and ODM services which are recognized and favored by our customers. Looking forward to your inquiry and cooperation  

Dear Customers, The Ching Ming Festival holiday will be on April 4th, and work will resume on April 5th. If you have any product related questions, please leave a message and we will reply as soon as possible during business hours. For urgent matters, please contact Max: +86 18938089701   About Surgsci Surgsci Medical Ltd. aims to improve people's health and quality of life. We adhere to the mission of independent research and development, popularize minimally invasive medical technology, and share high-quality humanistic care. Through clinical practice, we innovate in technology to benefit patients, medical staff, and medical institutions. We provide holistic innovative solutions for hepatobiliary and gastrointestinal surgery, ENT surgery, colorectal surgery, bariatric surgery, oncology, urology, thoracic surgery, women's and children's surgery, neurosurgery, etc. We are in Shenzhen, Guangdong. Founded in 2017, Surgsci is a national high-tech enterprise, focusing on the innovation for smart consumables for minimally invasive surgery. We are specialized in the production of laparoscopic surgical instruments, including disposable laparoscopic trocars and ultrasonic scalpels etc. We own two factories in Pingshan and Bao’an District, a total of about 1500 square meters of R&D office and 4000 square meters of GMP clean workshop with ISO13485. We integrate design, R&D, manufacturing, and sales. At present, we have more than 40 authorized patents at home and abroad. The products have obtained CE & FDA and are sold to nearly 30 countries in Europe, Asia, the Middle East, and South America. We Provide high quality OEM and ODM services which are recognized and favored by our customers. Looking forward to your inquiry and cooperation.

Inverted Thread Sleeve Inverted thread sleeve design improves abdominal wall fixation. Obturator Tip Detaches The specially designed obturator tip detaches rather than cuts tissue fibers as it pushes away tissue and vessels, reducing trauma. Large-Flow Valve Design Large-flow main steam valve design can establish pneumoperitoneum faster and make abdominal pressure more stable. Movable Sealing Air Valve The movable sealing air valve structure ensures good airtightness when the instrument enters. About Surgsci Surgsci Medical Ltd. aims to improve people's health and quality of life. We adhere to the mission of independent research and development, popularize minimally invasive medical technology, and share high-quality humanistic care. Through clinical practice, we innovate in technology to benefit patients, medical staff, and medical institutions. We provide holistic innovative solutions for hepatobiliary and gastrointestinal surgery, ENT surgery, colorectal surgery, bariatric surgery, oncology, urology, thoracic surgery, women's and children's surgery, neurosurgery, etc. We are in Shenzhen, Guangdong. Founded in 2017, Surgsci is a national high-tech enterprise, focusing on the innovation for smart consumables for minimally invasive surgery. We are specialized in the production of laparoscopic surgical instruments, including disposable laparoscopic trocars and ultrasonic scalpels etc. We own two factories in Pingshan and Bao’an District, a total of about 1500 square meters of R&D office and 4000 square meters of GMP clean workshop with ISO13485. We integrate design, R&D, manufacturing, and sales. At present, we have more than 40 authorized patents at home and abroad. The products have obtained CE & FDA and are sold to nearly 30 countries in Europe, Asia, the Middle East, and South America. We Provide high quality OEM and ODM services which are recognized and favored by our customers. Looking forward to your inquiry and cooperation.

A US Trademark Registration Certificate is an official document of registration by the United States Patent and Trademark Office. It can be used to demonstrate proof of ownership and registration. The official document also indicates current status and title of the registered mark. Obtaining the US trademark registration certificate means that SurgSci has entered the US market a step further. We hope that SurgSci can cooperate with medical companies, distributors and hospitals around the world to make our products better serve doctors and patients.   About Surgsci Surgsci Medical Ltd. aims to improve people's health and quality of life. We adhere to the mission of independent research and development, popularize minimally invasive medical technology, and share high-quality humanistic care. Through clinical practice, we innovate in technology to benefit patients, medical staff, and medical institutions. We provide holistic innovative solutions for hepatobiliary and gastrointestinal surgery, ENT surgery, colorectal surgery, bariatric surgery, oncology, urology, thoracic surgery, women's and children's surgery, neurosurgery, etc. We are in Shenzhen, Guangdong. Founded in 2017, Surgsci is a national high-tech enterprise, focusing on the innovation for smart consumables for minimally invasive surgery. We are specialized in the production of laparoscopic surgical instruments, including disposable laparoscopic trocars and ultrasonic scalpels etc. We own two factories in Pingshan and Bao’an District, a total of about 1500 square meters of R&D office and 4000 square meters of GMP clean workshop with ISO13485. We integrate design, R&D, manufacturing, and sales. At present, we have more than 40 authorized patents at home and abroad. The products have obtained CE & FDA and are sold to nearly 30 countries in Europe, Asia, the Middle East, and South America. We Provide high quality OEM and ODM services which are recognized and favored by our customers. Looking forward to your inquiry and cooperation.  

1. Using sterile technique, remove the device from the package. 2. Select the appropriate size ligating clip cartridge and corresponding clip applier. 3. Grasp the applier by the handle and trigger. 4. Insert the jaws of the instrument into the individual cartridge slot, making sure the tips of the applier are perpendicular to the surface of the cartridge. Insert the applier until it stops. Do not force the applier. It should enter and withdraw from the cartridge smoothly. 5. Keeping the applier jaws perpendicular to the surface of the cartridge, retract the applier from the cartridge. The clip will be securely helped in the applier jaws. It is not necessary to maintain trigger tension to hold the clip in the applier jaws. 6. Position the clip around the tubular structure to be ligated. Apply sufficient force to fully close the applier to assure that the clip is satisfactorily placed and secured.

Instruction for Use-Disposable Endo Cutter Stapler and Cartridge 1. Remove the device from the package. Choose the suitable sized cartridge. Insert the cartridge to the cartridge cave. Ensure to align the arrows on both sides to have the cartridge loaded successfully. 2. Before firing, please make sure the cartridge is properly loaded. Clench the active handle the cartridge is closed. Then pull the release button to the starting point. If the cartridge is open, this indicates the cartridge is properly loaded. Clench the trigger lightly again to make the cartridge closed. 3. Insert the endoscopic linear cutter into the trocar sleeve until the articulation of the cartridge is visible. Pull the release button back to the starting point the cartridge is open. (This step is not shown in the video) 4. Adjust the device according to the target tissue. Turn the articulation lever lightly and the cartridge head will move at the same direction. 5. Clench the trigger and release. Repeat this action until the trigger cannot push. Check if the black button reaches the schedule stapling position. After firing, keep at least 20 seconds in order to staunching bleeding. 6. Move the device carefully. Turn the reset joint to the 0 position. Clence the trigger to close the jaw. Pull the release button to the starting point to open the jaw. Pull the black button downward to the end. Rotate the cartridge 45 degrees anticlockwise. Remove the cartridge of the device. Check the staple line, the process completes.    

Recently, Guangdong High-tech Enterprise Association announced the “2022 Guangdong Province Excellent High-tech Product List”, SurgSci won the “2022 Guangdong Province Excellent High-tech Product” with its R&D innovation ability in the field of medical equipment. Guangdong Province’s excellent high-tech products are to improve the source of scientific and technological innovation, accelerate the transformation and industrialization of achievements, promote high-level scientific and technological self-reliance and self-improvement, guide enterprises to promote high-quality development with high-quality scientific and technological supply, and are the continuation and upgrade of “Guangdong Province’s high-tech products”. They have higher requirements for product technology, quality and market prospects. The recognition threshold has been significantly increased, so the gold content is also higher. The selected products have characteristics such as domestic first creation that can replace imports, reaching international advanced level or domestic advanced level, which are the manifestation of enterprise core competitiveness. SurgSci ultrasonic scalpel is based on core software control algorithm, precision mechanical transmission design, medical metal materials and anti-tissue adhesion coating. It has independently developed ultra-high cycle fatigue resistant titanium alloy, high-performance piezoelectric ceramic materials and anti-tissue adhesion knife head technology. It has fully mastered the artificial intelligence control core algorithm and core material technology of ultrasonic treatment equipment. The core processing technology titanium alloy utilization rate has increased by 45%, processing efficiency has increased by at least 30%, tissue cutting speed and medium-large blood vessel cutting closure effect are excellent comparable to imported brands. The whole machine is domestically produced and has strong cost and performance advantages in national centralized procurement It is currently the only domestic enterprise that can achieve whole machine domestic production in the field of high-performance and high-reliability ultrasonic scalpel Its high-end core materials and components effectively resolve the risk of foreign supply interruption. This time SurgSci ultrasonic soft tissue cutting hemostasis device was awarded as “Guangdong Province Excellent High-tech Product” title which is an authoritative recognition and affirmation of SurgSci’s medical equipment scientific research achievements scientific and technological innovation ability and market competitiveness by provincial high-tech enterprise association and various industries for many years The result of this selection further consolidates SurgSci’s core technology and brand competitiveness in the industry providing a more solid foundation for future high-tech industry development.   Leading technology endless innovation SurgSci will always adhere to innovation-driven orientation give full play to industry-university-research linkage advantages and industry wisdom ecological circle strength strengthen innovative technology talent cultivation continuously promote key core technology innovation ability improvement promote scientific and technological innovation and technical breakthroughs and make more positive contributions to promoting high-tech industry development.

The urethrostomy operation for male cats refers to removing the skin around the male cat’s genitals together with the testicles, separating the penis, incising the urethra to the widest part, and suturing the urethra and surrounding skin to form an artificial opening.   After the urethrostomy operation in male cats, pay attention to disinfection and anti-infection measures. This is because the cat's physiology has been altered, which may increase the risk of infection. In the later stage, cat owners need to pay attention to observe the cat's urination   About Surgsci Surgsci Medical Ltd. aims to improve people's health and quality of life. We adhere to the mission of independent research and development, popularize minimally invasive medical technology, and share high-quality humanistic care. Through clinical practice, we innovate in technology to benefit patients, medical staff, and medical institutions. We provide holistic innovative solutions for hepatobiliary and gastrointestinal surgery, ENT surgery, colorectal surgery, bariatric surgery, oncology, urology, thoracic surgery, women's and children's surgery, neurosurgery, etc. We are in Shenzhen, Guangdong. Founded in 2017, Surgsci is a national high-tech enterprise, focusing on the innovation for smart consumables for minimally invasive surgery. We are specialized in the production of laparoscopic surgical instruments, including disposable laparoscopic trocars and ultrasonic scalpels etc. We own two factories in Pingshan and Bao’an District, a total of about 1500 square meters of R&D office and 4000 square meters of GMP clean workshop with ISO13485. We integrate design, R&D, manufacturing, and sales. At present, we have more than 40 authorized patents at home and abroad. The products have obtained CE & FDA and are sold to nearly 30 countries in Europe, Asia, the Middle East, and South America. We Provide high quality OEM and ODM services which are recognized and favored by our customers. Looking forward to your inquiry and cooperation.  

From March 14th to 17th, SurgSci participated in the 35th Zhejiang International Medical Scientific Education Equipment Supplies & Technology Exhibition (hereinafter referred to as Zhejiang Spring Medical Exhibition) The exhibition was co-sponsored by Zhejiang Provincial Commission and Zhejiang Provincial Department of Science and Technology and was grandly helped in Hangzhou International Expo Center. This year’s medical attracted more than 700 outstanding medical device companies from home and abroad to sign up for the exhibition, of which domestic companies accounted for nearly 90%. SurgSci hopes that through this exhibition, we can show our strength to more enterprises and medical institutions, show our products, share minimally invasive technology and improve patients’ medical experience.   About Surgsci Surgsci Medical Ltd. aims to improve people's health and quality of life. We adhere to the mission of independent research and development, popularize minimally invasive medical technology, and share high-quality humanistic care. Through clinical practice, we innovate in technology to benefit patients, medical staff, and medical institutions. We provide holistic innovative solutions for hepatobiliary and gastrointestinal surgery, ENT surgery, colorectal surgery, bariatric surgery, oncology, urology, thoracic surgery, women's and children's surgery, neurosurgery, etc. We are in Shenzhen, Guangdong. Founded in 2017, Surgsci is a national high-tech enterprise, focusing on the innovation for smart consumables for minimally invasive surgery. We are specialized in the production of laparoscopic surgical instruments, including disposable laparoscopic trocars and ultrasonic scalpels etc. We own two factories in Pingshan and Bao’an District, a total of about 1500 square meters of R&D office and 4000 square meters of GMP clean workshop with ISO13485. We integrate design, R&D, manufacturing, and sales. At present, we have more than 40 authorized patents at home and abroad. The products have obtained CE & FDA and are sold to nearly 30 countries in Europe, Asia, the Middle East, and South America. We Provide high quality OEM and ODM services which are recognized and favored by our customers. Looking forward to your inquiry and cooperation.

Recently, the testing center of Shenzhen SurgSci Medical Ltd. passed the qualification review and conformity assessment of the China National Accreditation Service for Conformity Assessment (CNAS or National Accreditation Service for short), and successfully obtained the CNAS qualification certificate of the nation accreditation laboratory. China National Accreditation Service for Conformity Assessment (CNAS) is a national institution approved by the AQSIQ and approved and authorized by the National Accreditation Administration. It is highly authoritative in terms of laboratory evaluation,   The testing center of Shenzhen SurgSci Medical Ltd. started the application of CNAS accreditation in January, 2022. After a year of careful preparation, it has gone through layers of review including intentional application, formal application, review preparation, document review, on-site review, and accreditation approval.   Through document review, on-site test, authorized signatory assessment and technical personnel’s questioning, the experts of the review team unanimously recognized the operation of the quality assurance system, the technical testing ability of the certification project, and the guarantee testing work impartiality, etc., and all application contents are approved for recommendation.   As assessed by CNAS, SurgSci complies with the requirements of ISO/IEC 17025:2017 “Accreditation Criteria for the Competence of Testing and Calibration Laboratories” and has the service ability to undertake medical device inspection and testing. The successful acquisition of the CNAS qualification certificate of the National Accreditation Laboratory indicates that SurgSci has reached the international accreditation standard in terms of hardware facilities, testing capabilities and management level of medical device testing, and has the technical ability to carry out testing and calibration services in accordance with the corresponding accreditation standards. It can also issue test data results stamped with the CNAS National Laboratory Accreditation Mark and the ILAC International Mutual Recognition Joint Mark, which has international authority and credibility.   In the future, SurgSci, which has passed the national CNAS accreditation, will continue to expand and improve in an all-round way. We adhere to the quality policy of “accurate, fair, efficient, standardized, and improved”, effectively maintain the operation of the management system, and conscientiously do a good job in laboratory testing and customer service, make more contributions to the company’s quality-related work and customer satisfaction.   About Surgsci Surgsci Medical Ltd. aims to improve people's health and quality of life. We adhere to the mission of independent research and development, popularize minimally invasive medical technology, and share high-quality humanistic care. Through clinical practice, we innovate in technology to benefit patients, medical staff, and medical institutions. We provide holistic innovative solutions for hepatobiliary and gastrointestinal surgery, ENT surgery, colorectal surgery, bariatric surgery, oncology, urology, thoracic surgery, women's and children's surgery, neurosurgery, etc. We are in Shenzhen, Guangdong. Founded in 2017, Surgsci is a national high-tech enterprise, focusing on the innovation for smart consumables for minimally invasive surgery. We are specialized in the production of laparoscopic surgical instruments, including disposable laparoscopic trocars and ultrasonic scalpels etc. We own two factories in Pingshan and Bao’an District, a total of about 1500 square meters of R&D office and 4000 square meters of GMP clean workshop with ISO13485. We integrate design, R&D, manufacturing, and sales. At present, we have more than 40 authorized patents at home and abroad. The products have obtained CE & FDA and are sold to nearly 30 countries in Europe, Asia, the Middle East, and South America. We Provide high quality OEM and ODM services which are recognized and favored by our customers. Looking forward to your inquiry and cooperation.

Customer Feedback SurgSci has been committed to the development of product quality and customer satisfaction. In the past few years, we have accumulated many orders from all over the world and obtained customer feedback on Disposable Trocars and Trocar Kits, achieving 100% customer satisfaction. We will continue to work hard to developand produce more medical devices, promote minimally invasive technology, and provide more people with a safer medical experience     About Surgsci Surgsci Medical Ltd. aims to improve people's health and quality of life. We adhere to the mission of independent research and development, popularize minimally invasive medical technology, and share high-quality humanistic care. Through clinical practice, we innovate in technology to benefit patients, medical staff, and medical institutions. We provide holistic innovative solutions for hepatobiliary and gastrointestinal surgery, ENT surgery, colorectal surgery, bariatric surgery, oncology, urology, thoracic surgery, women's and children's surgery, neurosurgery, etc. We are in Shenzhen, Guangdong. Founded in 2017, Surgsci is a national high-tech enterprise, focusing on the innovation for smart consumables for minimally invasive surgery. We are specialized in the production of laparoscopic surgical instruments, including disposable laparoscopic trocars and ultrasonic scalpels etc. We own two factories in Pingshan and Bao’an District, a total of about 1500 square meters of R&D office and 4000 square meters of GMP clean workshop with ISO13485. We integrate design, R&D, manufacturing, and sales. At present, we have more than 40 authorized patents at home and abroad. The products have obtained CE & FDA and are sold to nearly 30 countries in Europe, Asia, the Middle East, and South America. We Provide high quality OEM and ODM services which are recognized and favored by our customers. Looking forward to your inquiry and cooperation.  

Today is International Women’s Day. It is a time to amplify female voices and empower women and girls to live up to their full potential. It’s also an opportunity to redouble our efforts to achieve gender equality. At SurgSci, one-third of our employees are women who play irreplaceable roles in the workplace.   Surgsci Medical Ltd. aims to improve people's health and quality of life. We adhere to the mission of independent research and development, popularize minimally invasive medical technology, and share high-quality humanistic care. Women's health issues have always been a key issue that has been widely concerned by all walks of life. We hope that by improving medical technology, we can bring women a safer and more effective medical experience.   SurgSci wishes you a happy International Women’s Day.

Compared with radical resection of rectal tumors, local resection of rectal tumors has the advantages of small surgical trauma, low risk, fast postoperative recovery and short hospital stay, in particular, it is necessary to avoid artificial anus dysfunction and obstacles caused by radical surgery and postoperative voiding function and sexual function.   There are many surgical methods and methods for local excision of rectal tumors, such as transanal approach, transsacral approach, transsphincter approach, and transanal endoscopic approach. They overlap and differ in surgical indications.Due to the different surgical approaches and methods, postoperative complications also vary. Therefore, familiarity with these surgical methods, and on the premise of strictly grasping the surgical indications, correct selection of surgical methods can significantly improve surgical efficacy and reduce surgical complications.   At present, there are various approaches and methods for local excision of early rectal tumors. The following is a brief introduction to various surgical methods for local excision of rectal tumors. 1. Transanal local excision of rectal tumor This is one of the most ancient and common surgical methods. Its advantages are direct surgical approach, simple operation, no surgical incision on the body surface after operation, and less trauma and surgical risk. But its disadvantages are: (1) Due to the position of the patient during the operation, most doctors can only perform surgery in a sitting position, and the surgeon's line of sight and the lesion are in the horizontal position instead of the traditional overlooking surgery that conforms to the surgeon's habits. (2) The degree of freedom of operation of surgical instruments in the rectum and anal canal is limited, and can only be performed within 45 degrees at most, and many fine operations cannot be performed. (3) It is difficult to expose the surgical field and the operating space is narrow, so the accuracy of the operation is greatly affected. (4) The technical difficulties and shortcomings will become more and more obvious as the distance between the tumor and the anal verge increases. (5) Surgical specimens might be broken or cannot be evaluated during pathological examination. As a result, it is difficult to provide meaningful guidance for postoperative treatment of patients.   All of these may ultimately bring some disadvantages and uncertainties to the future surgical efficacy. Surgical indications for transanal resection are therefore usually limited to: ž The lesion is located within 4-5cm from the anal verge. ž The diameter of the lesion is not greater than 2cm. ž If it is a malignant tumor, it must be Tis-T1N0. The more common complications after this operation are postoperative wound bleeding and urinary retention. Accurate mastery of suturing techniques and preoperative prophylactic placement of urinary catheters can prevent the occurrence of these complications.   2. Local resection of rectal tumor through the sacrococcygeal region Transsacral rectal tumor resection is also known as Kraske's operation; the procedure was pioneered by German surgeon Kraske in 1885. The surgical steps are briefly described as follows: The patient was placed in a prone position, and a straight incision was made from the sacrococcygeal joint to the anus. After the coccyx was removed, the pelvic floor muscles were separated to expose the posterior rectal wall, and the posterior rectal wall was incised at the upper edge of the puborectalis to expose the tumor in the rectal cavity. After resection of the tumor, wounds such as the rectum were repaired and sutured. Compared with transanal local resection of rectal tumors, Kraske's surgical field is slightly improved, and the operation is also in line with the surgeon's habits, but its disadvantages are as follows: (1) The requirements for the location of the lesion are stricter. The lesion on the anterior wall of the rectum is the best indication. For tumors located on the posterior wall of the rectum or less than 4 cm or more than 7 cm from the anal verge, due to unclear location of the lesion or poor exposure of the surgical field It will make the operation very difficult. (2) Long-term sacrococcygeal pain is often associated with coccyxectomy, especially when sitting. (3) The incidence of postoperative wound infection and rectocutaneous fistula is relatively high. A Japanese author reported that the incidence of rectal skin fistula was as high as 20%. The occurrence of the latter will cause greater psychological and physical intrusion to the patient, and the treatment and treatment of this complication are also relatively complicated. In severe cases, a temporary enterostomy is required. This treatment is difficult for patients to understand and accept. Therefore, at present, very few people in the field of colorectal surgery in China use this kind of operation to treat rectal tumors.   3. Local resection of rectal tumor through the anal sphincter This operation is also known as the Mason operation. Introduced by British surgeon Mason in 1970.   The surgical steps are briefly described as follows; the patient is placed in the prone position. Make a straight incision from the sacrococcygeal joint to the anal edge, cut the skin and subcutaneous tissue, and decide whether to remove the coccyx according to the location of the tumor (when the lower edge of the tumor is greater than 6-7cm from the anal edge, the coccyx needs to be removed). After removing the coccyx, cut off the external anal sphincter For the superficial group and the subcutaneous ring, cut the mesorectum, cut off the puborectalis muscle, expose the posterior wall of the rectum, incise the posterior wall of the rectum from the anal edge to the proximal side, and open and expose the rectum. After resection of the lesion, the rectum and external sphincters of each group were repaired and sutured.   Compared with the previous two operations, the biggest advantage of this operation is that the exposure of the operation field has been greatly improved, and the surgeon can perform various fine operations in a spacious operation field, and the operation quality and curative effect have been greatly improved. Moreover, due to its special surgical approach and surgical method, its surgical indications are broader. All rectal tumors within 8cm from the anal verge, such as rectal adenomas, including carpet-like villous adenomas, early cancers of adenomas, early rectal cancers, rectal carcinoids, and rectal stromal tumors (malignant tumors should be classified within Tis-T1N0 stage) Rectovaginal fistula and rectourethral fistula can be treated with this surgical method.   4. Transanal endoscopic microsurgery TEM In the 1980s, German surgeon Gerhard Buess and Wolf Company jointly invented and developed a set of transanal endoscopic microsurgery system, namely TEM. This is a new surgery that combines modern laparoscopy, endoscopy and minimally invasive techniques. The main components of the system are; 1 Special rectoscope, two lengths of 12cm and 20cm are available for different conditions. 2 double ball joint movable arm device to fix the rectoscope. 3 The endoscopic system can display the magnified surgical field of view on the image monitor in real time. 4 Inflation and flushing suction system, the former can keep the air pressure in the intestinal cavity constant, and the latter keeps the operating field clear and clean. 5 Special instruments include needle-shaped electric scalpels with different curvatures for intracavitary surgery, aspirators, and needle holders that can automatically return suture needles, etc.   These well-made surgical instruments provide a reliable guarantee for precise operation. Compared with traditional local resection of rectal tumors, TEM has excellent surgical field exposure and a large enough operating space. Excellent surgical conditions and surgical instruments have significantly improved the quality of local resection of tumors, and enabled patients to recover during surgery. Compared with traditional surgery, it has obvious advantages in terms of bleeding, rapid postoperative recovery and shortened hospitalization days.   Due to its special design concept and the excellent performance of the instrument, TEM covers almost all the diseases that can be operated by Mason's operation, and expands the surgical site from the original 8cm from the anal verge to the colorectum within 20cm from the anal verge. Based on the above advantages, TEM has become the first choice for local resection of rectal tumors at home and abroad, and is recommended by NCCN as the first choice for resection of early rectal cancer. The more common complications of TEM surgery include postoperative bleeding and pelvic infection. The former is related to unskilled suturing techniques during the operation, and the latter is related to improper protection techniques and treatment measures when the rectum is cut through during the operation. However, with the continuous proficiency and accumulation of surgical techniques and experience, these complications will become less and less common.   The article is traslated from Qiu Zhonghui '直肠肿瘤局部切除的几种手术方式'.     About Surgsci Surgsci Medical Ltd. aims to improve people's health and quality of life. We adhere to the mission of independent research and development, popularize minimally invasive medical technology, and share high-quality humanistic care. Through clinical practice, we innovate in technology to benefit patients, medical staff, and medical institutions. We provide holistic innovative solutions for hepatobiliary and gastrointestinal surgery, ENT surgery, colorectal surgery, bariatric surgery, oncology, urology, thoracic surgery, women's and children's surgery, neurosurgery, etc. We are in Shenzhen, Guangdong. Founded in 2017, Surgsci is a national high-tech enterprise, focusing on the innovation for smart consumables for minimally invasive surgery. We are specialized in the production of laparoscopic surgical instruments, including disposable laparoscopic trocars and ultrasonic scalpels etc. We own two factories in Pingshan and Bao’an District, a total of about 1500 square meters of R&D office and 4000 square meters of GMP clean workshop with ISO13485. We integrate design, R&D, manufacturing, and sales. At present, we have more than 40 authorized patents at home and abroad. The products have obtained CE & FDA and are sold to nearly 30 countries in Europe, Asia, the Middle East, and South America. We Provide high quality OEM and ODM services which are recognized and favored by our customers. Looking forward to your inquiry and cooperation.

Inverted Thread Sleeve Inverted thread sleeve design improves abdominal wall fixation. Transparent Bladeless Tip Transparent bladeless tip provides clear images when using endoscopic instruments. Large-Flow Valve Design Large-flow main steam valve design can establish pneumoperitoneum faster and make abdominal pressure more stable. Movable Sealing Air Valve The movable sealing air valve structure ensures good airtightness when the instrument enters. About Surgsci Surgsci Medical Ltd. aims to improve people's health and quality of life. We adhere to the mission of independent research and development, popularize minimally invasive medical technology, and share high-quality humanistic care. Through clinical practice, we innovate in technology to benefit patients, medical staff, and medical institutions. We provide holistic innovative solutions for hepatobiliary and gastrointestinal surgery, ENT surgery, colorectal surgery, bariatric surgery, oncology, urology, thoracic surgery, women's and children's surgery, neurosurgery, etc. We are in Shenzhen, Guangdong. Founded in 2017, Surgsci is a national high-tech enterprise, focusing on the innovation for smart consumables for minimally invasive surgery. We are specialized in the production of laparoscopic surgical instruments, including disposable laparoscopic trocars and ultrasonic scalpels etc. We own two factories in Pingshan and Bao’an District, a total of about 1500 square meters of R&D office and 4000 square meters of GMP clean workshop with ISO13485. We integrate design, R&D, manufacturing, and sales. At present, we have more than 40 authorized patents at home and abroad. The products have obtained CE & FDA and are sold to nearly 30 countries in Europe, Asia, the Middle East, and South America. We Provide high quality OEM and ODM services which are recognized and favored by our customers. Looking forward to your inquiry and cooperation.  

Ultrasonic scalpel surgery has been widely used in human surgery, but there is a big difference between pets and humans. Therefore, SurgSci has independently developed a professional pet ultrasonic scalpel for pet doctors. It will be more suitable for pet surgery applications.   1. Pet Ultrasonic Scalpel System: The system directly sets the coagulation function most commonly used by domestic pet doctors (corresponding to the MIN key of the blade) and the cutting function (corresponding to the Max button of the shear). More importantly, the new system of SurgSci pet ultrasonic scalpel is equipped with two operating modes, ECO mode and Dynamic mode, the schematic diagram is as follows:     The ultrasonic scalpel system specially designed for pet doctors automatically configures coagulation and cutting functions. It is more convenient and practical to completely transition from manual operation to automatic operation. At the same time, we have increased the mode selection to meet the doctor’s requirements for higher coagulation efficiency and faster cutting speed.   2. Different shears automatically adapt to the best parameters When the handle and shear are installed, they need to be recognized by the generator. The generator automatically enters the screen of shear type selection. The screen shows as follow:   Three different lengths of shears need to be selected to pass the confirmation. The generator will control the excitation of the shear according to the best parameters matched by the selected one. To summarize, the advantages of SurgSci pet ultrasonic scalpel system are as follows: After the selected model has passed the confirmation, the system will match the best parameters of different types of shears. The detection and control of the shear by the system will be more precise; the use of shear will be more stable during the operation; the blood coagulation will be better, and the cutting efficiency will be higher.   Although pet medical technology is mostly derived from human medical treatment. But people and pets are very different. The professional ultrasonic scalpel independently developed by SurgSci for pets will be more suitable for pet open surgery and laparoscopic surgery.       About Surgsci Surgsci Medical Ltd. aims to improve people's health and quality of life. We adhere to the mission of independent research and development, popularize minimally invasive medical technology, and share high-quality humanistic care. Through clinical practice, we innovate in technology to benefit patients, medical staff, and medical institutions. We provide holistic innovative solutions for hepatobiliary and gastrointestinal surgery, ENT surgery, colorectal surgery, bariatric surgery, oncology, urology, thoracic surgery, women's and children's surgery, neurosurgery, etc. We are in Shenzhen, Guangdong. Founded in 2017, Surgsci is a national high-tech enterprise, focusing on the innovation for smart consumables for minimally invasive surgery. We are specialized in the production of laparoscopic surgical instruments, including disposable laparoscopic trocars and ultrasonic scalpels etc. We own two factories in Pingshan and Bao’an District, a total of about 1500 square meters of R&D office and 4000 square meters of GMP clean workshop with ISO13485. We integrate design, R&D, manufacturing, and sales. At present, we have more than 40 authorized patents at home and abroad. The products have obtained CE & FDA and are sold to nearly 30 countries in Europe, Asia, the Middle East, and South America. We Provide high quality OEM and ODM services which are recognized and favored by our customers. Looking forward to your inquiry and cooperation.

Disposable ligation clips are mainly used clinically in laparoscopic surgery, such as laparoscopic cholecystectomy, or in surgical operations to clamp blood vessels to stop bleeding and close tubular tissues, including small and medium arteries and veins, bile ducts, etc. The role of the ligation clip is mainly to fix local tissues or ligate blood vessels during surgery. They can help with better hemostasis and wound recovery. However, disposable ligation clips are usually not suitable for large arteries and larger veins. It should be noted that disposable ligation clips cannot be used for tubal ligation. The material selection of disposable ligation clips will pay more attention to the treatment effect and the problem of staying in the body after surgery than traditional metal titanium clips. The choice of materials fits better with the human body, and it is not easy to produce rejection reactions after surgery. It will be more stable in the patient’s body. Due to the high stability of the disposable ligation clip, it is not easy to fall off after the operation. If other related examinations such as MRI are required afterwards, there will usually not be any special effects. If it is used in gastroscopy and other related operations, the disposable ligation clip may fall off as the local tissue heals, and it will be excreted along the digestive tract, and there is no need to take special measures to remove it.            

Recently, the biomedical materials R&D team of Shenzhen SurgSci Medical Ltd. made a research achievement titled "Hyaluronic acid and chitosan-based injectable and self-healing hydrogel with inherent antibacterial and antioxidant bioactivities" was published in the international SCI academic journal "INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES" (Chinese Academy of Sciences SCI Journal Area 1, IF=8.025, TOP journal).   Based on natural biomacromolecules, quaternary ammonium chitosan (QCS), tannic acid (TA) and oxidant hyaluronic acid (OHA), a new product called QCS-l-TA-l-OHA was developed. The hydrogel dressing ("l" is "link"), whose research inspiration comes from natural substances such as quaternary ammonium chitosan (QCS), tannic acid (TA), oxidant hyaluronic acid (OHA) and their derivatives The antibacterial, antioxidative and wound healing functions of the substance have fully exerted the biological activity of the new intelligent multifunctional hydrogel, a natural substance and its derivatives, and has broad application prospects for the development of the biomedical field.     In order to study the intrinsic antibacterial and antioxidant biological activities of the dressing, the team members designed the molecular structure of the QCS-l-TA-l-OHA hydrogel and used the hydrogel as a rat full-thickness skin incision model wound. The dressing is composed of QCS, OHA, TA and the cross-linked bonds of the polymer network to build a chemical structure. Under the action of dynamic imine bonds and multiple hydrogen bonds between the amino groups on QCS and the aldehyde groups on OHA, The PBS solution of OHA and QCS containing TA formula (TA + OHA) were respectively filled into a double-barreled syringe, and injected directly into the target wound at the same time, and it was concluded that the hydrogel can quickly gel in situ and seamlessly fill and fit The results of irregular wounds have further verified that hydrogel is beneficial to promote the rapid healing of various skin wounds and physiological wounds, and avoid patients from excessive use of antibiotics or antioxidants in a long treatment cycle, which is an urgent need for clinical wound management provided important support.     In order to evaluate the in vivo gelation formation ability of QCS-l-TA-l-OHA hydrogel, the team members subcutaneously injected the precursor polymerization solution in the back of rats to realize in situ gelation, and the gelation could maintain enough completeness and strength. The healing-accelerating performance of QCS-l-TA-l-OHA hydrogel was evaluated through a full-thickness wound defect model, which proved that it has excellent antibacterial, antioxidative and wound healing abilities.   QCS-l-TA-l-OHA hydrogel significantly promotes wound healing in rat skin full-thickness incision model The SurgSci team further analyzed the therapeutic effect of the hydrogel on living skin wounds by H&E histological staining. The results showed that the TA added in the QCS-l-TA-l-OHA hydrogel has antibacterial and antioxidant effects, and is better for It is very important to improve skin wound healing, and the hydrogel has a significant therapeutic effect on granulation tissue thickening. QCS-l-TA-l-OHA has good results in the evaluation of skin tissue repair   QCS-l-TA-l-OHA hydrogel, as a novel biological substance, can be administered in vivo by endoscope or injected by injection needle in clinic, which can provide minimally invasive treatment and local specific wound care to some extent. The treatment has opened up a new way and brought new gospel to the biomedical community. In the future, QCS-l-TA-l-OHA hydrogel is expected to become a new type of biomaterial for wound healing.     About Surgsci Surgsci Medical Ltd. aims to improve people's health and quality of life. We adhere to the mission of independent research and development, popularize minimally invasive medical technology, and share high-quality humanistic care. Through clinical practice, we innovate in technology to benefit patients, medical staff, and medical institutions. We provide holistic innovative solutions for hepatobiliary and gastrointestinal surgery, ENT surgery, colorectal surgery, bariatric surgery, oncology, urology, thoracic surgery, women's and children's surgery, neurosurgery, etc. We are in Shenzhen, Guangdong. Founded in 2017, Surgsci is a national high-tech enterprise, focusing on the innovation for smart consumables for minimally invasive surgery. We are specialized in the production of laparoscopic surgical instruments, including disposable laparoscopic trocars and ultrasonic scalpels etc. We own two factories in Pingshan and Bao’an District, a total of about 1500 square meters of R&D office and 4000 square meters of GMP clean workshop with ISO13485. We integrate design, R&D, manufacturing, and sales. At present, we have more than 40 authorized patents at home and abroad. The products have obtained CE & FDA and are sold to nearly 30 countries in Europe, Asia, the Middle East, and South America. We Provide high quality OEM and ODM services which are recognized and favored by our customers. Looking forward to your inquiry and cooperation.

  Here shows SurgSci ultrasonic scalpel generator packaging. 1. Generator Carton   2. Generator Inner Package-Layer 1   3. Generator Inner Package-Layer 3   4. Generator Package-Layer 3   5. Packaging Display We will ensure that each product has high-quality packaging to ensure safe delivery to customers.   For more information, please visit our website: https://www.surgscience.com/ https://www.disposabletrocar.com/   Contact Us: Email: service@surgsci.com Wechat/WhatsApp: +86-1582676433 Alibaba: Innosurg   About Surgsci Surgsci Medical Ltd. aims to improve people's health and quality of life. We adhere to the mission of independent research and development, popularize minimally invasive medical technology, and share high-quality humanistic care. Through clinical practice, we innovate in technology to benefit patients, medical staff, and medical institutions. We provide holistic innovative solutions for hepatobiliary and gastrointestinal surgery, ENT surgery, colorectal surgery, bariatric surgery, oncology, urology, thoracic surgery, women's and children's surgery, neurosurgery, etc. We are in Shenzhen, Guangdong. Founded in 2017, Surgsci is a national high-tech enterprise, focusing on the innovation for smart consumables for minimally invasive surgery. We are specialized in the production of laparoscopic surgical instruments, including disposable laparoscopic trocars and ultrasonic scalpels etc. We own two factories in Pingshan and Bao’an District, a total of about 1500 square meters of R&D office and 4000 square meters of GMP clean workshop with ISO13485. We integrate design, R&D, manufacturing, and sales. At present, we have more than 40 authorized patents at home and abroad. The products have obtained CE & FDA and are sold to nearly 30 countries in Europe, Asia, the Middle East, and South America. We Provide high quality OEM and ODM services which are recognized and favored by our customers. Looking forward to your inquiry and cooperation.

Surgical staplers and staples are medical devices that may be used in place of sutures. They are often used in minimally invasive surgery, such as gastrointestinal anastomosis. They can close large wounds or incisions more quickly and be less painful than stitches for patients. It is similar to traditional manual suturing. But with the addition of modern technology, it has a very significant effect in clinical use. The main working principle is to used large nails to its tissue is cut or anastomosed, and its function is more like a stapler. According to the scope of application, it can be divided into skin staplers, rectal staplers, and blood vessel staplers.   The cutter stapler has the following advantages: 1. Use titanium nails or stainless steel nails to suture tightly and moderately tight. 2. It is a one-time use to avoid cross-infection. 3. Fewer side effects and less surgical complications.     About Surgsci Surgsci Medical Ltd. aims to improve people's health and quality of life. We adhere to the mission of independent research and development, popularize minimally invasive medical technology, and share high-quality humanistic care. Through clinical practice, we innovate in technology to benefit patients, medical staff, and medical institutions. We provide holistic innovative solutions for hepatobiliary and gastrointestinal surgery, ENT surgery, colorectal surgery, bariatric surgery, oncology, urology, thoracic surgery, women's and children's surgery, neurosurgery, etc. We are in Shenzhen, Guangdong. Founded in 2017, Surgsci is a national high-tech enterprise, focusing on the innovation for smart consumables for minimally invasive surgery. We are specialized in the production of laparoscopic surgical instruments, including disposable laparoscopic trocars and ultrasonic scalpels etc. We own two factories in Pingshan and Bao’an District, a total of about 1500 square meters of R&D office and 4000 square meters of GMP clean workshop with ISO13485. We integrate design, R&D, manufacturing, and sales. At present, we have more than 40 authorized patents at home and abroad. The products have obtained CE & FDA and are sold to nearly 30 countries in Europe, Asia, the Middle East, and South America. We Provide high quality OEM and ODM services which are recognized and favored by our customers. Looking forward to your inquiry and cooperation.  

The video shows our inner packaging, color box and cartons for different quantities of ultrasonic scalpel shears. Inner Packaging:     Color Box:   Carton for 3 Shears:   Carton for 20 Shears: We will ensure that each product has high-quality packaging to ensure safe delivery to customers.   For more information, please visit our website: https://www.surgscience.com/ https://www.disposabletrocar.com/   Contact Us: Email: service@surgsci.com Wechat/WhatsApp: +86-1582676433 Alibaba: Innosurg     About Surgsci Surgsci Medical Ltd. aims to improve people's health and quality of life. We adhere to the mission of independent research and development, popularize minimally invasive medical technology, and share high-quality humanistic care. Through clinical practice, we innovate in technology to benefit patients, medical staff, and medical institutions. We provide holistic innovative solutions for hepatobiliary and gastrointestinal surgery, ENT surgery, colorectal surgery, bariatric surgery, oncology, urology, thoracic surgery, women's and children's surgery, neurosurgery, etc. We are in Shenzhen, Guangdong. Founded in 2017, Surgsci is a national high-tech enterprise, focusing on the innovation for smart consumables for minimally invasive surgery. We are specialized in the production of laparoscopic surgical instruments, including disposable laparoscopic trocars and ultrasonic scalpels etc. We own two factories in Pingshan and Bao’an District, a total of about 1500 square meters of R&D office and 4000 square meters of GMP clean workshop with ISO13485. We integrate design, R&D, manufacturing, and sales. At present, we have more than 40 authorized patents at home and abroad. The products have obtained CE & FDA and are sold to nearly 30 countries in Europe, Asia, the Middle East, and South America. We Provide high quality OEM and ODM services which are recognized and favored by our customers. Looking forward to your inquiry and cooperation.

The full name of the ultrasonic scalpel is ultrasonic cutting hemostatic scalpel. The working principle of the ultrasonic scalpel is to produce a low thermal effect when cutting soft tissue, and the part of the cut tissue is heated locally. After the temperature rises, the thrombin in the tissue is activated, and a large number of coagulation factors are activated, which shortens the bleeding time. Afterwards, a lot of cavitation bubbles will appear, which block the end of the blood vessel and accelerate the speed of blood coagulation. A relatively clean wound will provide doctors a better view, improve the efficiency of the operation, and make the sterilization operation safer.   Unlike the electric scalpel, the ultrasonic scalpel coagulates blood vessels mainly through mechanical resonance in addition to thermal energy. This mechanical energy can break the hydrogen bonds in the molecules, and when it is delivered to the tissue, the hydrogen bonds of the protein are broken and denatured.   However, tissues with different characteristics have different requirements for the coagulation of the ultrasonic scalpel due to their different resonance characteristics. An excellent ultrasonic scalpel will perform differentiated work on different tissues.     SurgSci Pet Ultrasonic Scalpel adopts self-developed artificial neural network (Artificial Neural Network) series of algorithms, three intelligent systems to ensure good clinical results when dealing with tissue cutting and coagulation with different characteristics.     ➤Neu-Track System In order to make the ultrasonic scalpel always work in the resonance state, it is necessary to track and predict the natural frequency at the current or next moment, so as to adjust the output frequency of the host to be equal to it. This way it can work in resonance.   ➤Neu-Cut System Intelligently sense the tissue cutting progress, automatically reduce the driving power when the tissue cutting is about to be completed and sound an alarm at different cutting stages, protect the forceps head, improve the life of the forceps head gasket, and increase the service life Titanium alloy core of the ultrasonic scalpel.   ➤Neu-Seal System Blood vessels in vivo are affected by factors such as blood pressure, body temperature, blood flow, arteries, and veins, and have different closing characteristics. Multidimensional modeling training is carried out on it, and deep learning capabilities are used to improve the stability of cutting and solidification.   About Surgsci Surgsci Medical Ltd. aims to improve people's health and quality of life. We adhere to the mission of independent research and development, popularize minimally invasive medical technology, and share high-quality humanistic care. Through clinical practice, we innovate in technology to benefit patients, medical staff, and medical institutions. We provide holistic innovative solutions for hepatobiliary and gastrointestinal surgery, ENT surgery, colorectal surgery, bariatric surgery, oncology, urology, thoracic surgery, women's and children's surgery, neurosurgery, etc. We are in Shenzhen, Guangdong. Founded in 2017, Surgsci is a national high-tech enterprise, focusing on the innovation for smart consumables for minimally invasive surgery. We are specialized in the production of laparoscopic surgical instruments, including disposable laparoscopic trocars and ultrasonic scalpels etc. We own two factories in Pingshan and Bao’an District, a total of about 1500 square meters of R&D office and 4000 square meters of GMP clean workshop with ISO13485. We integrate design, R&D, manufacturing, and sales. At present, we have more than 40 authorized patents at home and abroad. The products have obtained CE & FDA and are sold to nearly 30 countries in Europe, Asia, the Middle East, and South America. We Provide high quality OEM and ODM services which are recognized and favored by our customers. Looking forward to your inquiry and cooperation.

Recently, the Ministry of Science and Technology announced the 2022 national key research and development plan project. An ultrasonic scalpel project led by Shenzhen SurgSci Medical Ltd. (hereinafter referred to as "SurgSci") was supported by the national key research and development plan. The national key research and development plan is oriented to the frontiers of world science and technology, the main economic battlefield, and the country's major needs. It focuses on the core competitiveness of industries, independent innovation capabilities, and national security strategies. A national science and technology plan mainly supported by common key technology and product research and development.   SurgSci has been approved by the national key research and development plan project and develops together with the industry leader in the technology research and development of domestic high-end medical devices. This demonstrates its outstanding technical advantages in the field of ultrasonic scalpel research and development.   Founded in 2017, SurgSci is deeply involved in the field of intelligent consumables for minimally invasive surgery. It is committed to promoting the national production of the core components, key raw materials and core algorithms of the ultrasonic scalpel and providing overall solutions for minimally invasive surgery around the world. Since its establishment, it has jointly built medical polymer materials laboratories, medical metal materials laboratories, acoustic laboratories, precision instruments and measurement laboratories, and GMP sterile clean workshops with well-known domestic universities. SurgSci has applied for more than 90 domestic and foreign patents, including more than 20 invention patent applications, 2 international invention patent applications, and more than 30 authorized patents.   About Surgsci Surgsci Medical Ltd. aims to improve people's health and quality of life. We adhere to the mission of independent research and development, popularize minimally invasive medical technology, and share high-quality humanistic care. Through clinical practice, we innovate in technology to benefit patients, medical staff, and medical institutions. We provide holistic innovative solutions for hepatobiliary and gastrointestinal surgery, ENT surgery, colorectal surgery, bariatric surgery, oncology, urology, thoracic surgery, women's and children's surgery, neurosurgery, etc. We are in Shenzhen, Guangdong. Founded in 2017, Surgsci is a national high-tech enterprise, focusing on the innovation for smart consumables for minimally invasive surgery. We are specialized in the production of laparoscopic surgical instruments, including disposable laparoscopic trocars and ultrasonic scalpels etc. We own two factories in Pingshan and Bao’an District, a total of about 1500 square meters of R&D office and 4000 square meters of GMP clean workshop with ISO13485. We integrate design, R&D, manufacturing, and sales. At present, we have more than 40 authorized patents at home and abroad. The products have obtained CE & FDA and are sold to nearly 30 countries in Europe, Asia, the Middle East, and South America. We Provide high quality OEM and ODM services which are recognized and favored by our customers. Looking forward to your inquiry and cooperation.

The video shows our factory's laboratories and equipments. For more information, please visit our website: https://www.surgscience.com/ https://www.disposabletrocar.com/   Contact Us: Email: service@surgsci.com Wechat/WhatsApp: +86-1582676433 Alibaba: Innosurg    

    Dear clients, we sincerely wish you all a Happy New Year! There is no better gift for us than to see you satisfied and happy. We wish you the realization of your goals, inspiration, warmth, joy and more memorable events! Let's not stop there, because in the new year only luck and success await us. Happy new year!   For more information, please visit our website: https://www.surgscience.com/ https://www.disposabletrocar.com/   Contact Us: Email: service@surgsci.com Wechat/WhatsApp: +86-1582676433 Alibaba: Innosurg     About Surgsci Surgsci Medical Ltd. aims to improve people's health and quality of life. We adhere to the mission of independent research and development, popularize minimally invasive medical technology, and share high-quality humanistic care. Through clinical practice, we innovate in technology to benefit patients, medical staff, and medical institutions. We provide holistic innovative solutions for hepatobiliary and gastrointestinal surgery, ENT surgery, colorectal surgery, bariatric surgery, oncology, urology, thoracic surgery, women's and children's surgery, neurosurgery, etc. We are in Shenzhen, Guangdong. Founded in 2017, Surgsci is a national high-tech enterprise, focusing on the innovation for smart consumables for minimally invasive surgery. We are specialized in the production of laparoscopic surgical instruments, including disposable laparoscopic trocars and ultrasonic scalpels etc. We own two factories in Pingshan and Bao’an District, a total of about 1500 square meters of R&D office and 4000 square meters of GMP clean workshop with ISO13485. We integrate design, R&D, manufacturing, and sales. At present, we have more than 40 authorized patents at home and abroad. The products have obtained CE & FDA and are sold to nearly 30 countries in Europe, Asia, the Middle East, and South America. We Provide high quality OEM and ODM services which are recognized and favored by our customers. Looking forward to your inquiry and cooperation.

Dear valued customers, SurgSci will celebrate Chinese Spring Festival from Jan 15th to 28th. During the holiday, you are free to place orders. All the orders will be processed on Jan 29th.   Our Website: https://www.surgscience.com/ https://www.disposabletrocar.com/   Contact Us: Email: service@surgsci.com Wechat/WhatsApp: +86-1582676433 Alibaba: Innosurg   About Surgsci Surgsci Medical Ltd. aims to improve people's health and quality of life. We adhere to the mission of independent research and development, popularize minimally invasive medical technology, and share high-quality humanistic care. Through clinical practice, we innovate in technology to benefit patients, medical staff, and medical institutions. We provide holistic innovative solutions for hepatobiliary and gastrointestinal surgery, ENT surgery, colorectal surgery, bariatric surgery, oncology, urology, thoracic surgery, women's and children's surgery, neurosurgery, etc. We are in Shenzhen, Guangdong. Founded in 2017, Surgsci is a national high-tech enterprise, focusing on the innovation for smart consumables for minimally invasive surgery. We are specialized in the production of laparoscopic surgical instruments, including disposable laparoscopic trocars and ultrasonic scalpels etc. We own two factories in Pingshan and Bao’an District, a total of about 1500 square meters of R&D office and 4000 square meters of GMP clean workshop with ISO13485. We integrate design, R&D, manufacturing, and sales. At present, we have more than 40 authorized patents at home and abroad. The products have obtained CE & FDA and are sold to nearly 30 countries in Europe, Asia, the Middle East, and South America. We Provide high quality OEM and ODM services which are recognized and favored by our customers. Looking forward to your inquiry and cooperation.

    The video shows the steps of using a veress needle. SurgSci is a professional laparoscopic instruments manufacturer and supplier in China. Veress neeedles are one of the main products. For more information of veress needles please visit: https://www.surgscience.com/products-44630   Our Website: https://www.surgscience.com/ https://www.disposabletrocar.com/   Contact Us: Email: service@surgsci.com Wechat/WhatsApp: +86-1582676433 Alibaba: Innosurg     About Surgsci Surgsci Medical Ltd. aims to improve people's health and quality of life. We adhere to the mission of independent research and development, popularize minimally invasive medical technology, and share high-quality humanistic care. Through clinical practice, we innovate in technology to benefit patients, medical staff, and medical institutions. We provide holistic innovative solutions for hepatobiliary and gastrointestinal surgery, ENT surgery, colorectal surgery, bariatric surgery, oncology, urology, thoracic surgery, women's and children's surgery, neurosurgery, etc. We are in Shenzhen, Guangdong. Founded in 2017, Surgsci is a national high-tech enterprise, focusing on the innovation for smart consumables for minimally invasive surgery. We are specialized in the production of laparoscopic surgical instruments, including disposable laparoscopic trocars and ultrasonic scalpels etc. We own two factories in Pingshan and Bao’an District, a total of about 1500 square meters of R&D office and 4000 square meters of GMP clean workshop with ISO13485. We integrate design, R&D, manufacturing, and sales. At present, we have more than 40 authorized patents at home and abroad. The products have obtained CE & FDA and are sold to nearly 30 countries in Europe, Asia, the Middle East, and South America. We Provide high quality OEM and ODM services which are recognized and favored by our customers. Looking forward to your inquiry and cooperation.

    About our testing devices, we have two equipment for measuring purified water, conductivity and pH meters. We have a toughness test device and a stiffness test device. We have an air tightness tester. It is used to measure the air tightness and gas resistances of laparoscopic trocars. The UV spectrophotometer is for measuring the absorbance item in the chemical projects.   Factory Laboratory Tour: 1. Microbiology Lab: https://www.surgscience.com/video/products-detail-1318571 2. Sterile Room and Microbial Containment Room: https://www.surgscience.com/news-detail-1322105 3. Positive Control Lab: https://www.surgscience.com/news-detail-1333320 4. Physical and Chemical Lab: https://www.surgscience.com/news-detail-1382633 5. Electrical Lab: https://www.surgscience.com/video/products-detail-1440042 6. Cleaning Room: https://www.surgscience.com/news-detail-1613310   For more information, please visit our website: https://www.surgscience.com/ https://www.disposabletrocar.com/   Contact Us: Email: service@surgsci.com Wechat/WhatsApp: +86-1582676433 Alibaba: Innosurg

Step into our cleaning room is a cabinet with cleaned glassware.   For more of our factory laboratory introduction: Microbiology Lab: https://www.surgscience.com/video/products-detail-1318571 Sterile Room and Microbial Containment Room: https://www.surgscience.com/news-detail-1322105 Positive Control Lab: https://www.surgscience.com/news-detail-1333320 Physical and Chemical Lab: https://www.surgscience.com/news-detail-1382633 Electrical Lab: https://www.surgscience.com/video/products-detail-1440042 For more information, please visit our website: https://www.surgscience.com/ https://www.disposabletrocar.com/   Contact Us: Email: service@surgsci.com Wechat/WhatsApp: +86-1582676433 Alibaba: Innosurg

1. Take the obturator and cannula out of the box using sterile technique. 2. Create an incision and ensure the abdominal cavity has been entered (refer to Hasson abdominal entry skill).   3. Pass two sutures through each fascial edge, assemble the obturator and cannula, insert the trocar into the cavity with suture lie post secured on the cannula. 4. Wrap the suture line around each suture tie post to make the cannula stable on the abdomen, unlock the cam on suture tie post to adjust cannula position in abdominal cavity. 5. Lock the suture tie post, press both locking buttons on the obturator top and release the obturator from cannula. 6. Connect the gas line and open the stopcock to make pneumoperitoneum, then insert surgical instruments through cannula for operation. 7. Push the outer seal release lever on the cannula to release the outer seal for specimen removal procedure during surgery. 8. Remove the gas line, loose sutures on the suture lie post, take out the cannula and suture the cavity.     ​About Surgsci Surgsci Medical Ltd. aims to improve people's health and quality of life. We adhere to the mission of independent research and development, popularize minimally invasive medical technology, and share high-quality humanistic care. Through clinical practice, we innovate in technology to benefit patients, medical staff, and medical institutions. We provide holistic innovative solutions for hepatobiliary and gastrointestinal surgery, ENT surgery, colorectal surgery, bariatric surgery, oncology, urology, thoracic surgery, women's and children's surgery, neurosurgery, etc. We are in Shenzhen, Guangdong. Founded in 2017, Surgsci is a national high-tech enterprise, focusing on the innovation for smart consumables for minimally invasive surgery. We are specialized in the production of laparoscopic surgical instruments, including disposable laparoscopic trocars and ultrasonic scalpels etc. We own two factories in Pingshan and Bao’an District, a total of about 1500 square meters of R&D office and 4000 square meters of GMP clean workshop with ISO13485. We integrate design, R&D, manufacturing, and sales. At present, we have more than 40 authorized patents at home and abroad. The products have obtained CE & FDA and are sold to nearly 30 countries in Europe, Asia, the Middle East, and South America. We Provide high quality OEM and ODM services which are recognized and favored by our customers. Looking forward to your inquiry and cooperation.

    In the electrical lab, we have two main devices. One is a power meter, it works for the ultrasonic scalpel system. Another one is a microscope equipment, for measuring our main amplitude and transverse amplitude projects. In the balance room, we have two analytical balances and one electronic balance. They are used to measure precision reagents. We also have a high temperature blast drying oven, mainly used to measure evaporation residue. There are also two fume hoods and a water bath. The water bath is used for the configuration of strong acid, alkali reagents and testing. In our gas chamber is a cylinder cabinet, an air generator, a hydrogen generator, a gas chromatograph, a headspace sampler, computers and a printer. We also have equipment for measuring EO residue. We store chemical reagents and cluture medium in reagent room. We have a lure tester is for testing the auxiliary gas valve interface project. The tensile machine measures firmness, tensile elongation, fixed trength and other items.   For more of our factory laboratory introduction: Microbiology Lab:https://www.surgscience.com/video/products-detail-1318571 Sterile Room and Microbial Containment Room:https://www.surgscience.com/news-detail-1322105 Positive Control Lab:https://www.surgscience.com/news-detail-1333320 Physical and Chemical Lab:https://www.surgscience.com/news-detail-1382633   For more information, please visit our website:https://www.surgscience.com/https://www.disposabletrocar.com/   Contact Us: Email: service@surgsci.com Wechat/WhatsApp: +86-1582676433 Alibaba: Innosurg   About Surgsci Surgsci Medical Ltd. aims to improve people's health and quality of life. We adhere to the mission of independent research and development, popularize minimally invasive medical technology, and share high-quality humanistic care. Through clinical practice, we innovate in technology to benefit patients, medical staff, and medical institutions. We provide holistic innovative solutions for hepatobiliary and gastrointestinal surgery, ENT surgery, colorectal surgery, bariatric surgery, oncology, urology, thoracic surgery, women's and children's surgery, neurosurgery, etc. We are in Shenzhen, Guangdong. Founded in 2017, Surgsci is a national high-tech enterprise, focusing on the innovation for smart consumables for minimally invasive surgery. We are specialized in the production of laparoscopic surgical instruments, including disposable laparoscopic trocars and ultrasonic scalpels etc. We own two factories in Pingshan and Bao’an District, a total of about 1500 square meters of R&D office and 4000 square meters of GMP clean workshop with ISO13485. We integrate design, R&D, manufacturing, and sales. At present, we have more than 40 authorized patents at home and abroad. The products have obtained CE & FDA and are sold to nearly 30 countries in Europe, Asia, the Middle East, and South America. We Provide high quality OEM and ODM services which are recognized and favored by our customers. Looking forward to your inquiry and cooperation.

    The setup of our physical and chemical laboratory is with experimental benches in the middle and rooms on both sides.   For more of our factory laboratory introduction: Microbiology Lab:https://www.surgscience.com/video/products-detail-1318571 Sterile Room and Microbial Containment Room: https://www.surgscience.com/news-detail-1322105 Positive Control Lab:https://www.surgscience.com/news-detail-1333320   For more information, please visit our website: https://www.surgscience.com/https://www.disposabletrocar.com/   Contact Us: Email: service@surgsci.com Wechat/WhatsApp: +86-1582676433 Alibaba: Innosurg   About Surgsci Surgsci Medical Ltd. aims to improve people's health and quality of life. We adhere to the mission of independent research and development, popularize minimally invasive medical technology, and share high-quality humanistic care. Through clinical practice, we innovate in technology to benefit patients, medical staff, and medical institutions. We provide holistic innovative solutions for hepatobiliary and gastrointestinal surgery, ENT surgery, colorectal surgery, bariatric surgery, oncology, urology, thoracic surgery, women's and children's surgery, neurosurgery, etc. We are in Shenzhen, Guangdong. Founded in 2017, Surgsci is a national high-tech enterprise, focusing on the innovation for smart consumables for minimally invasive surgery. We are specialized in the production of laparoscopic surgical instruments, including disposable laparoscopic trocars and ultrasonic scalpels etc. We own two factories in Pingshan and Bao’an District, a total of about 1500 square meters of R&D office and 4000 square meters of GMP clean workshop with ISO13485. We integrate design, R&D, manufacturing, and sales. At present, we have more than 40 authorized patents at home and abroad. The products have obtained CE & FDA and are sold to nearly 30 countries in Europe, Asia, the Middle East, and South America. We Provide high quality OEM and ODM services which are recognized and favored by our customers. Looking forward to your inquiry and cooperation.

    In our positive control room, staff and materials have separate passages. We have independent air conditioning system for this room. A biological safety cabinet and a centrifuge are used for testing.   For more of our factory laboratory introduction: Microbiology Lab: https://www.surgscience.com/video/products-detail-1318571 Sterile Room and Microbial Containment Room: https://www.surgscience.com/news-detail-1322105 For more information, please visit our website: https://www.surgscience.com/https:// www.disposabletrocar.com/   Contact Us: Email: service@surgsci.com Wechat/WhatsApp: +86-1582676433 Alibaba: Innosurg   About Surgsci Surgsci Medical Ltd. aims to improve people's health and quality of life. We adhere to the mission of independent research and development, popularize minimally invasive medical technology, and share high-quality humanistic care. Through clinical practice, we innovate in technology to benefit patients, medical staff, and medical institutions. We provide holistic innovative solutions for hepatobiliary and gastrointestinal surgery, ENT surgery, colorectal surgery, bariatric surgery, oncology, urology, thoracic surgery, women's and children's surgery, neurosurgery, etc. We are in Shenzhen, Guangdong. Founded in 2017, Surgsci is a national high-tech enterprise, focusing on the innovation for smart consumables for minimally invasive surgery. We are specialized in the production of laparoscopic surgical instruments, including disposable laparoscopic trocars and ultrasonic scalpels etc. We own two factories in Pingshan and Bao’an District, a total of about 1500 square meters of R&D office and 4000 square meters of GMP clean workshop with ISO13485. We integrate design, R&D, manufacturing, and sales. At present, we have more than 40 authorized patents at home and abroad. The products have obtained CE & FDA and are sold to nearly 30 countries in Europe, Asia, the Middle East, and South America. We Provide high quality OEM and ODM services which are recognized and favored by our customers. Looking forward to your inquiry and cooperation.

  The sterile room and the microbial containment room have independent air conditioning systems. We have two transfer windows are the passages for materials to enter and exit. Our staff enter through the separate passage. We have a particle detector, mainly used to detect our particle project. In the microbial containment room is a clean workbench, a microbial limit meter and an oscillator. This room is used for testing initial contamination bacteria and endotoxin items. In the sterile room is a clean bench and a bacteria collector. These are mainly used for testing aseptic items.   For more of our factory laboratory introduction: Microbiology Lab: https://www.surgscience.com/video/products-detail-1318571   Our Website: https://www.surgscience.com/ https://www.disposabletrocar.com/   Contact Us: Email: service@surgsci.com Wechat/WhatsApp: +86-1582676433 Alibaba: Innosurg   About Surgsci Surgsci Medical Ltd. aims to improve people's health and quality of life. We adhere to the mission of independent research and development, popularize minimally invasive medical technology, and share high-quality humanistic care. Through clinical practice, we innovate in technology to benefit patients, medical staff, and medical institutions. We provide holistic innovative solutions for hepatobiliary and gastrointestinal surgery, ENT surgery, colorectal surgery, bariatric surgery, oncology, urology, thoracic surgery, women's and children's surgery, neurosurgery, etc. We are in Shenzhen, Guangdong. Founded in 2017, Surgsci is a national high-tech enterprise, focusing on the innovation for smart consumables for minimally invasive surgery. We are specialized in the production of laparoscopic surgical instruments, including disposable laparoscopic trocars and ultrasonic scalpels etc. We own two factories in Pingshan and Bao’an District, a total of about 1500 square meters of R&D office and 4000 square meters of GMP clean workshop with ISO13485. We integrate design, R&D, manufacturing, and sales. At present, we have more than 40 authorized patents at home and abroad. The products have obtained CE & FDA and are sold to nearly 30 countries in Europe, Asia, the Middle East, and South America. We Provide high quality OEM and ODM services which are recognized and favored by our customers. Looking forward to your inquiry and cooperation.

    This video shows our microbiology lab of SurgSci factory. Here you can see the related devices and equipment. In the microbiology lab, there is a medicine cooler to put the petri dish, temporary bacteria and standard reagents, etc. The freezer in the lab is for storing the strains including bacillus subtilis and staphylococcus aureus, etc. On the experimental tables, there is a electric ceramic stove and cleaned laboratory bottles. Next is the sink for cleaning the laboratory containers and a cabinet where we put the containers to be sterilized and cleaned. We also have mode incubator and biochemical incubator for the cultivation of bacteria and molds. We have two steam autoclaves, one is for operations before sterilization, the other one is for waste sterilization operations.     About Surgsci Surgsci Medical Ltd. aims to improve people's health and quality of life. We adhere to the mission of independent research and development, popularize minimally invasive medical technology, and share high-quality humanistic care. Through clinical practice, we innovate in technology to benefit patients, medical staff, and medical institutions. We provide holistic innovative solutions for hepatobiliary and gastrointestinal surgery, ENT surgery, colorectal surgery, bariatric surgery, oncology, urology, thoracic surgery, women's and children's surgery, neurosurgery, etc. We are in Shenzhen, Guangdong. Founded in 2017, Surgsci is a national high-tech enterprise, focusing on the innovation for smart consumables for minimally invasive surgery. We are specialized in the production of laparoscopic surgical instruments, including disposable laparoscopic trocars and ultrasonic scalpels etc. We own two factories in Pingshan and Bao’an District, a total of about 1500 square meters of R&D office and 4000 square meters of GMP clean workshop with ISO13485. We integrate design, R&D, manufacturing, and sales. At present, we have more than 40 authorized patents at home and abroad. The products have obtained CE & FDA and are sold to nearly 30 countries in Europe, Asia, the Middle East, and South America. We Provide high quality OEM and ODM services which are recognized and favored by our customers. Looking forward to your inquiry and cooperation.

    We are a professional manufacturer of disposable trocars and ultrasonic scalpels in China. Our factory is in Shenzhen, China, including a total of about 1500 square meters of R&D office and 4000 square meters of GMP clean workshop with ISO13485 certification.   Contact Us: Email: service@surgsci.com Website: https://www.surgscience.com/ Wechat/WhatsApp: +86-1582676433     About Surgsci Surgsci Medical Ltd. aims to improve people's health and quality of life. We adhere to the mission of independent research and development, popularize minimally invasive medical technology, and share high-quality humanistic care. Through clinical practice, we innovate in technology to benefit patients, medical staff, and medical institutions. We provide holistic innovative solutions for hepatobiliary and gastrointestinal surgery, ENT surgery, colorectal surgery, bariatric surgery, oncology, urology, thoracic surgery, women's and children's surgery, neurosurgery, etc. We are in Shenzhen, Guangdong. Founded in 2017, Surgsci is a national high-tech enterprise, focusing on the innovation for smart consumables for minimally invasive surgery. We are specialized in the production of laparoscopic surgical instruments, including disposable laparoscopic trocars and ultrasonic scalpels etc. We own two factories in Pingshan and Bao’an District, a total of about 1500 square meters of R&D office and 4000 square meters of GMP clean workshop with ISO13485. We integrate design, R&D, manufacturing, and sales. At present, we have more than 40 authorized patents at home and abroad. The products have obtained CE & FDA and are sold to nearly 30 countries in Europe, Asia, the Middle East, and South America. We Provide high quality OEM and ODM services which are recognized and favored by our customers. Looking forward to your inquiry and cooperation.

    https://www.youtube.com/watch?v=S2TtV-8Blsg   In this video we'll show you how to use a 10mmOptical disposable laparoscopic trocar with the process of inserting an Endoscope.   1. Assemble the obturator and cannula 2. Close the stopcock 3. Insert the endoscope and secure it with the scope locking cam 4. Introduce the trocar 5. Press the locking button and remove the obturator and the endoscope 6. Attach a gas line 7. Insert surgical instruments 8. Remove the outer seal and take out the specimen -Push the outer seal release lever in a counterclockwise direction 9. Rotate and pull out the cannula   Surgsci is a professional laparoscopic instruments manufacturer and supplier in China. We have 7 sizes of optical trocars, including 5/10/12mm diameter, length:75/100/150mm https://www.surgscience.com/products-44623   Contact Us: Email: service@surgsci.com Website: https://www.surgscience.com/ Wechat/WhatsApp: +86-1582676433

    In this video we'll show you how to use a 10mm single-use bladed trocar.   Surgsci is a professional laparoscopic instruments manufacturer and supplier in China. We have 4 sizes of bladed trocars, including 5/10/12mm diameter, length:75/100mm https://www.surgscience.com/products-44625   Steps of Using Surgsci Bladed Laparoscopic Trocar: Take obturator and cannula out of box, check if they are the same size Press the lock button on obturator top, hold it and push obturator tip to see if the blade goes out and then bounces back to sheath; Load obturator with cannula, hold trocar vertical to abdomen and puncture at incision (Do not rotate during puncturing to avoid damage on surround tissue) Hold both buttons on obturator top and release obturator from cannula; Connect gas supply tube to make pneumoperitoneum, then insert surgical instruments through cannula for operation; Push the lock on cannula to separate cover for bringing out tissue/cleaning stuff during surgery (Not applicable to 5mm trocars); Rotate cannula and pull it out from abdomen after surgery. Contact Us: Email: service@surgsci.com Website: https://www.surgscience.com/ Wechat/WhatsApp: +86-1582676433

    Instructions for Use-5mm Optical Laparoscopic Trocars: - Remove the obturator and cannula from the box and check if their dimensions match. - Insert the endoscope from the hole on the top of the obturator and then lock them together. - Load the obturator with the cannula, hold the trocar and insert it at a 90-degree angle to the abdomen (Rotate and push to facilitate puncture). - Stop puncturing when seeing viscera on endoscope camera, unlock the endoscope and take it out. - Hold both buttons on obturator top and release obturator from cannula; - Connect gas supply tube to make pneumoperitoneum, then insert surgical instruments through cannula for operation; - Push the lock on cannula to separate cover for bringing out tissue/cleaning stuff during surgery (Not applicable to 5mm trocars); - Rotate cannula and pull it out from abdomen after surgery.   Contact Us: Email: service@surgsci.com Website: https://www.surgscience.com/ Wechat/WhatsApp: +86-1582676433 (Max May）

Now more and more people keep dogs, and with more dogs, there will be more things to do. One of them is neutering or spaying your own dog. When a female dog is spayed, her ovaries and uterus are completely removed. Some veterinarians choose only to remove the ovaries of the female dog during surgery.   Some people are hesitant about this and are unsure about having the procedure. In fact, considering the many benefits after surgery, it is still necessary. So, what are the benefits of spaying female dogs? Spaying a female dog has the following benefits:   1. Spaying helps preventing them from reproducing and creating unwanted dogs or puppies If dogs are not sterilized, it will only lead to more dogs, and eventually the number of dogs abandoned will greatly increase. The increase in the number of stray dogs will increase the probability of infecting and carrying the severe infectious disease rabies, endangering the lives of warm-blooded mammals and humans.   2. Spaying prevent uterine infections and breast cancer Sterilization of female dogs can effectively reduce the incidence of some common diseases. Including pyometra (high incidence in female dogs over 5 years old), pseudopregnancy, alopecia, breast tumors and other common diseases, and even reduce the recurrence rate of urethral stones.   3. Spaying helps increase life expectancy Spaying can help female dogs live longer. Studies shows that on average dogs who are neutered or spayed live one and a half years longer than those who are not. Dogs without doing spay surgery can live to be about eight years old. However, spayed dogs can live nine and a half years or more.   4. Spaying helps eliminate the troubles an anxiety during estrus After spaying, the dog will not be overly excited, manic and other temperament changes due to estrus, and will not have much interest in other dogs. This reduces the chances of your dog straying, getting lost, fighting, getting injured and getting sick.     The pet ultrasonic scalpel Surgsci developed can bring the following benefits to pets during surgery Quick recovery from minor wounds Sutureless for infection prevention Shorter surgery time to reduce anesthesia risk Quick cuts and hemostasis to reduce bleeding   More on Surgsci ultrasonic scalpel visit: https://www.surgscience.com/products-44632   Contact Us: Email: service@surgsci.com Website: https://www.surgscience.com/ Wechat/WhatsApp: +86-1582676433 (Max May）   About Surgsci Surgsci Medical Ltd. aims to improve people's health and quality of life. We adhere to the mission of independent research and development, popularize minimally invasive medical technology, and share high-quality humanistic care. Through clinical practice, we innovate in technology to benefit patients, medical staff, and medical institutions. We provide holistic innovative solutions for hepatobiliary and gastrointestinal surgery, ENT surgery, colorectal surgery, bariatric surgery, oncology, urology, thoracic surgery, women's and children's surgery, neurosurgery, etc. We are in Shenzhen, Guangdong. Founded in 2017, Surgsci is a national high-tech enterprise, focusing on the innovation for smart consumables for minimally invasive surgery. We are specialized in the production of laparoscopic surgical instruments, including disposable laparoscopic trocars and ultrasonic scalpels etc. We own two factories in Pingshan and Bao’an District, a total of about 1500 square meters of R&D office and 4000 square meters of GMP clean workshop with ISO13485. We integrate design, R&D, manufacturing, and sales. At present, we have more than 40 authorized patents at home and abroad. The products have obtained CE & FDA and are sold to nearly 30 countries in Europe, Asia, the Middle East, and South America. We Provide high quality OEM and ODM services which are recognized and favored by our customers. Looking forward to your inquiry and cooperation.

A trocar is a surgical instrument that penetrates the abdominal wall to provide a passage for other surgical instruments to enter the body cavity and is a minimally invasive surgical instrument. It is suitable for various minimally invasive surgical operations and laparoscopic operations. Its main function is to puncture the abdominal wall tissue of the human body during laparoscopic surgery, transport gas into the abdominal cavity, and establish a channel for the endoscope and surgical instruments to enter and exit the abdominal cavity from the outside.   There are different types of disposable trocars, such as hasson and balloon trocars; optical access trocars; bladed trocars; non-bladed, non-optiview trocars. They normally contain the following components: locking cap, piercing cannula assembly, locking seal cap assembly, locking switch, gas barrier sealing cap, insufflation valve, insufflation switch, retaining ring, one-way valve, a sealing patch, and a balloon. It has a compact structure that can be safe and effective. In clinical operations, it is easy to operate and can greatly reduce the wound area and shorten the operation time. Its use reduces bleeding and postoperative infection in patients while improving surgical quality, reducing postoperative pain, and speeding up healing. Due to the adoption of the fixing structure, the disposable trocar can be firmly fixed after being punctured into the body, and is not easy to fall off during the operation.   The disposable trocars independently developed by Surgsci mainly include：optical trocars (Endopass), bladed trocars (Quickpass), Hasson trocars (Hassonpass), bladeless trocars (Easypass), Valveless Trocars (Without Valve).   Surgsci's disposable trocars have the following advantages： Double V-blade design-low damage, easy to heal Full Sharp Angle Sleeve Barb Design-stable and reliable, no displacement Self-Developed Seal Material-scratch-resistant and tear-resistant Large Flow Gas Injection Valve Design-fast insufflation speed and stable abdominal pressure Contact Us: Email: service@surgsci.com Website: https://www.surgscience.com/ Wechat/WhatsApp: +86-1582676433

  1. Reduce the Number of Stray Cats Cats have a short estrus cycle and strong reproductive ability. If the cat is not neutered or spayed, you can imagine how many kittens will be born. If the owner can't afford it and doesn't help them find a good owner, these cats will become stray cats. It is even estimated that a pair of cats can breed 200,000 offspring in 7 years! So in order to reduce the number of stray cats, please neuter or spay the cats.   2. Disease Prevention The sterilization of male cats can prevent many congenital genetic diseases related to the reproductive system; for female cats, it can reduce physiological diseases such as mammary glands and ovaries.   3. Reduce Estrus in Cats Female cats start making funny noise and is more vocal than normal when they are in heat. After spaying, the excessive yowling or mating calls during estrus will be reduced.   4. Reduce Aggressiveness Neutered male cats will be less aggressive and will not pee everywhere to mark their territory, so you don't have to smell urine all the time in your house.   5. Change the Cat's Personality Many neutered cats will become tamer and less aggressive and stop fighting with other pets or their owners.   6. Prevent Cats from Running Away When the estrus period comes, the cat may run away from home, or even jump off the building and get injured. The cat's appetite will suddenly increase or decrease, and the quality of sleep will also deteriorate. These conditions will be improved after sterilization.   7. Prolong Life Neutered and spayed pets live longer, healthier, and happier lives because they have fewer behavioral problems, and they are less prone to infections, degenerative diseases, and trauma/violent death. Studies have shown that spayed female cats lived 39% longer and neutered male cats lived 62% longer.   About Surgsci Surgsci Medical Ltd. aims to improve people's health and quality of life. We adhere to the mission of independent research and development, popularize minimally invasive medical technology, and share high-quality humanistic care. Through clinical practice, we innovate in technology to benefit patients, medical staff, and medical institutions. We provide holistic innovative solutions for hepatobiliary and gastrointestinal surgery, ENT surgery, colorectal surgery, bariatric surgery, oncology, urology, thoracic surgery, women's and children's surgery, neurosurgery, etc. We are in Shenzhen, Guangdong. Founded in 2017, Surgsci is a national high-tech enterprise, focusing on the innovation for smart consumables for minimally invasive surgery. We are specialized in the production of laparoscopic surgical instruments, including disposable laparoscopic trocars and ultrasonic scalpels etc. We own two factories in Pingshan and Bao’an District, a total of about 1500 square meters of R&D office and 4000 square meters of GMP clean workshop with ISO13485. We integrate design, R&D, manufacturing, and sales. At present, we have more than 40 authorized patents at home and abroad. The products have obtained CE & FDA and are sold to nearly 30 countries in Europe, Asia, the Middle East, and South America. We Provide high quality OEM and ODM services which are recognized and favored by our customers. Looking forward to your inquiry and cooperation.   https://www.surgscience.com/news-detail-1102437   Contact Us: Email: service@surgsci.com Website: https://www.surgscience.com/ Wechat/WhatsApp: +86-1582676433

https://www.surgscience.com/news-detail-1096317   On November 19, 2022, the first award ceremony of the International Eagle Snake Awards of the Word Endoscopy Doctors Association in China was held in Baoan, Shenzhen. Hundreds of experts and professors including Academician Zhang Yangde and Professor He De attended the conference.   The international "Eagle Snake Award" is an international global medical award in the medical field, which is assessed and reviewed by the World Association of Endoscopists and reported to relevant Chinese government departments for record. Domestic and foreign counterparts, colleges and universities, hospitals and various clinical specialties, and related enterprises at home and abroad have given enthusiastic support. Chairman He De of the Association, Secretary-General Xie Qilin, Deputy Secretary-General Zou Aimin and other experts have devoted a lot of effort. This award will promote the development of endoscopic minimally invasive high-tech in various countries, promote the invention of cutting-edge high-tech products, and benefit modern clinical practice. The development of medicine.   The World Association of Endoscopists will take the establishment of the international "Eagle Snake Award" as an opportunity to launch the selection of "International Outstanding Endoscopist Award", "International Endoscopist Leader Award", "International Endoscopist Outstanding Achievement Award", "International Endoscopist Lifetime Award" Achievement Award" to promote the integration of production, education, research and application. At the same time, the association will use the journal "Health Frontiers" as a platform to organize more than 70 experts to review, on the one hand, recommend excellent papers to SCI journals as soon as possible, and on the other hand, strive to make "Health Frontiers" enter the SCI core journals within three to five years.   The meeting awarded 77 "International Eagle and Snake Awards" related awards around the world, including Academician Zhong Nanshan's Outstanding Contribution Leader Award for Respiratory Disease; Armando J. Huaringa's Outstanding Achievement Leader Award for Respiratory Disease; Academician Wang Longde's Outstanding Contribution Leader Award for Stroke; Academician Zheng Shusen and Yuri S. Gently won the Outstanding Contribution Leader Award for Organ Transplantation, Academician Zhang Yangde and Wang Qiushengde Endoscopist Outstanding Achievement Leader Award, etc.   Feng Gengchao, chairman of Surgsci Medical Ltd., attended the conference as an award presenter and gave a speech of "Key Technology and Innovation Development Direction of Ultrasonic Energy Minimally Invasive Surgical Equipment".

Surgical Treatment Procedures for Spaying and Liver Mass Resection in a Cat. https://www.youtube.com/watch?v=z_RY2zaySyc   Our Pet Channel: @SurgPet More videos about Pet Surgery: https://www.youtube.com/playlist?list=PLmz3iHZlvqoIKm7CxbZJhcNh52SCMUwS9   Pet Ultrasonic Scalpel: https://www.youtube.com/playlist?list=PLmz3iHZlvqoJ6W0MtuT6nBg2BkxzbLJsa   Please contact us for more information: Email: service@surgsci.com Website: https://www.surgscience.com/ WhatsApp: +86-1582676433

https://www.youtube.com/watch?v=6VNwaM2_Zpw   Neutering, or castration, is the surgical removal of the testicles. The video shows the entire surgical procedure for neutering a Schnauzer puppy. Surgsci Pet Ultrasonic Scalpel is used in the surgery for cutting and coagulation. More detailed information about pet ulrasonic scalpel, please visit: https://www.surgscience.com/video/products-detail-979117   Contact us: Email: service@surgsci.com Website: https://www.surgscience.com/ WhatsApp: +86-1582676433

2023 is just around the corner, and we have listed 10 best medical trade shows and conferences to attend.   MEDICAL JAPAN   B to B Trade Show Covering All the Products/Services/Technologies in the Healthcare Industry Dates: 1/18/2023 - 1/20/2023 Venue: INTEX Osaka, Osaka, Japan Website: http://www.medical-jpn.jp/en/     Arab Health 2023 Healthcare Exhibition, Medical Conferences and Exhibition, Dubai Dates: 1/30/2023 - 2/2/2023 Venue: Dubai World Trade Centre, Dubai, United Arab Emirates Website: https://www.arabhealthonline.com/     KIMES 2023 Korea International Medical & Hospital Equipment Show Dates: 3/23/2023 - 3/26/2023 Venue: COEX, Seoul, South Korea Website: http://www.kimes.kr/eng/     ExpoMED Eurasia 2023 International Istanbul Medical Analysis, Diagnosis, Treatment, Rehabilitation Product, Device, System, Technology, Equipment and Hospitals Fair Dates: 3/16/2023 - 3/18/2023 Venue: Tuyap Fair Convention and Congress Center, Istanbul, Turkey Website: http://www.expomedistanbul.com/     Hospitalar 2023 International event of solutions, products, services, technology, innovation and equipment for the healthcare sector Dates: 5/23/2023 - 5/26/2023 Venue: Sao Paulo Expo, Sao Paulo, Brazil Website: https://www.hospitalar.com/en/     FIME 2023 International Medical Trade Fair and Congress in the United States Dates: 6/21/2023 - 6/23/2023 Venue: Miami Beach Convention Center, Miami FL, United States Website: https://www.fimeshow.com/     Medicall Chennai 2023 India's Premier B2B Medical Equipment Show Dates: TBD Venue: Chennai Trade Centre, Chennai, India Website: https://www.medicall.in/     Expo Hospital 2023 11th International Exhibition of Technologies, Products and Services for Hospitals, Clinics and Laboratories Dates: 9/12/2023 - 9/14/2023 Venue: Metropolitan Santiago Convention & Event Center, Santiago, Chile Website: https://www.expohospital.cl/en/     Africa Health & Medlab Africa 2023 Africa Health Exhibition and Congress Dates: 5/30/2023 - 6/1/2023 Venue: Gallagher Convention Centre, Johannesburg, South Africa Website:https://www.africahealthexhibition.com/     MEDICA 2023 World Forum for Medicine, International Trade Fair with Congress Dates: TBD Venue: Messe Dusseldorf Fairgrounds, Dusseldorf, Germany Website: https://www.medica-tradefair.com/   About Surgsci Surgsci Medical Ltd. aims to improve people's health and quality of life. We adhere to the mission of independent research and development, popularize minimally invasive medical technology, and share high-quality humanistic care. Through clinical practice, we innovate in technology to benefit patients, medical staff, and medical institutions. We provide holistic innovative solutions for hepatobiliary and gastrointestinal surgery, ENT surgery, colorectal surgery, bariatric surgery, oncology, urology, thoracic surgery, women's and children's surgery, neurosurgery, etc. We are in Shenzhen, Guangdong. Founded in 2017, Surgsci is a national high-tech enterprise, focusing on the innovation for smart consumables for minimally invasive surgery. We are specialized in the production of laparoscopic surgical instruments, including disposable laparoscopic trocars and ultrasonic scalpels etc. We own two factories in Pingshan and Bao’an District, a total of about 1500 square meters of R&D office and 4000 square meters of GMP clean workshop with ISO13485. We integrate design, R&D, manufacturing, and sales. At present, we have more than 40 authorized patents at home and abroad. The products have obtained CE & FDA and are sold to nearly 30 countries in Europe, Asia, the Middle East, and South America. We Provide high quality OEM and ODM services which are recognized and favored by our customers. Looking forward to your inquiry and cooperation.

Castration (ie neutering) of male cats is a procedure commonly performed by veterinarians. A simple description of male cat neutering is removal of the testicle from the scrotum and simultaneous ligation of the spermatic cord and testicular artery and vein. Neutering can make male cats sterile and correct a range of undesirable behaviors caused by male hormones, such as urinating and howling.   Surgical Procedure:   1. Firstly inject sedation and anesthesia into the cat and wait for it to ‘fall asleep’, then insert a catheter into the mouth to allow the cat to inhale anesthesia through spontaneous breathing.   2. Clip and disinfect the scrotum and surrounding skin. Cover the surgical area with a sterile cloth and prepare the surgical instruments (curved hemostats, sharp scissors, and tissue forceps), and the surgery can begin.   3. A small incision is made on the ventral side of the scrotum to expose the testicle. During the process, the veterinarian needs to hold the scrotum with the left hand to keep the skin that wraps the testicle taut and use the scalpel in the right hand to operate.   4. Remove the first testicle from the scrotum, ligate the spermatic cord and blood vessels, and remove the testicle.   5. Use absorbable thread for ligation. After ligation, observe whether there is bleeding, and put it back into the cat’s body after confirming that there is no problem. In the same way, remove the testicle on the other side.   6. Finally, check the wound, close the skin, apply iodine or iodine tincture for disinfection. Generally, the scrotum is not sutured, and it will slowly shrink in the end. However, for the large wound, it can be deal with accordingly, and may choose to use surgical glue or other methods.   About Surgsci Surgsci Medical Ltd. aims to improve people's health and quality of life. We adhere to the mission of independent research and development, popularize minimally invasive medical technology, and share high-quality humanistic care. Through clinical practice, we innovate in technology to benefit patients, medical staff, and medical institutions. We provide holistic innovative solutions for hepatobiliary and gastrointestinal surgery, ENT surgery, colorectal surgery, bariatric surgery, oncology, urology, thoracic surgery, women's and children's surgery, neurosurgery, etc. We are in Shenzhen, Guangdong. Founded in 2017, Surgsci is a national high-tech enterprise, focusing on the innovation for smart consumables for minimally invasive surgery. We are specialized in the production of laparoscopic surgical instruments, including disposable laparoscopic trocars and ultrasonic scalpels etc. We own two factories in Pingshan and Bao’an District, a total of about 1500 square meters of R&D office and 4000 square meters of GMP clean workshop with ISO13485. We integrate design, R&D, manufacturing, and sales. At present, we have more than 40 authorized patents at home and abroad. The products have obtained CE & FDA and are sold to nearly 30 countries in Europe, Asia, the Middle East, and South America. We Provide high quality OEM and ODM services which are recognized and favored by our customers. Looking forward to your inquiry and cooperation.

Many of us may already know the benefits of spaying or neutering cats and dogs, but is it necessary to spay or neuter pet rabbits? It is very necessary and beneficial to spay or neuter your rabbit. Spaying or neutering can prolong the life of rabbits, reduce the risk of cancer, improve their problem behaviors, avoid breeding, and make group life safer for rabbits. Spaying or neutering rabbits is just as important as cats and dogs.   https://www.youtube.com/watch?v=8OQ2sHyoC0M   1. Increase Life Expectancy Spaying or neutering your rabbit can significantly add to their life expectancy and benefits their general health and wellbeing. In particular, female rabbits, if not spayed, have an 80% chance of developing uterine cancer between the ages of 2 and 5. After rabbits are spayed or neutered, their overproduction of hormones can be balanced and the risk of uterine or ovarian cancer can be reduced to almost zero percent.   2. Improve Problem Behaviors Changing problem behaviors such as urination, being short-tempered, destroying furniture, attacking other rabbits and growling, etc., In life, many rabbits die from gastrointestinal obstruction due to excessive eating of foreign objects such as paper, sawdust and wires. Because the mouth of the rabbit is very narrow, there is no way to spit out what has been eaten. Therefore, it stays in the stomach and intestines, causing enteritis and bloating. Illness starts with flatulence, eating less, and then not eating anything. Therefore, some clinic veterinarians who see rabbits stop eating completely will tell there is a high risk of death.   3. Avoid Overbreeding The average age of sexual maturity of small and medium-sized female rabbits is 4-6 months, and the average life span is about 8 years. The longest has been ten years. When rabbits are sexually mature, as long as they continue to receive mating, humping, they can produce up to 14 baby rabbits with each litter and could have 12 litters a year. The reproductive capacity is incredible.   4. Provide Better Companionship You can raise a few more rabbits. Rabbits are social species and prefer to live in groups. After spaying or neutering, the rabbits’ temperament will become gentle and more friendly. Female rabbits are less likely to bite, lunge at, and scratch other pets. they can be put together with other male or female rabbits. Even if the owner does not have time for them, they are not alone.   About Surgsci Surgsci Medical Ltd. aims to improve people's health and quality of life. We adhere to the mission of independent research and development, popularize minimally invasive medical technology, and share high-quality humanistic care. Through clinical practice, we innovate in technology to benefit patients, medical staff, and medical institutions. We provide holistic innovative solutions for hepatobiliary and gastrointestinal surgery, ENT surgery, colorectal surgery, bariatric surgery, oncology, urology, thoracic surgery, women's and children's surgery, neurosurgery, etc. We are in Shenzhen, Guangdong. Founded in 2017, Surgsci is a national high-tech enterprise, focusing on the innovation for smart consumables for minimally invasive surgery. We are specialized in the production of laparoscopic surgical instruments, including disposable laparoscopic trocars and ultrasonic scalpels etc. We own two factories in Pingshan and Bao’an District, a total of about 1500 square meters of R&D office and 4000 square meters of GMP clean workshop with ISO13485. We integrate design, R&D, manufacturing, and sales. At present, we have more than 40 authorized patents at home and abroad. The products have obtained CE & FDA and are sold to nearly 30 countries in Europe, Asia, the Middle East, and South America. We Provide high quality OEM and ODM services which are recognized and favored by our customers. Looking forward to your inquiry and cooperation.

Dog Spay | Demonstration of Using an Ultrasonic Scalpel for Dog Spay   When a female dog is spayed, her ovaries and uterus are completely removed. Some veterinarians choose only to remove the ovaries of the female dog during surgery.   With the excellent cutting and coagulation functions of the Surgsci Pet Ultrasonic Scalpel, only small wounds are left for the dog during the spaying or neutering operation, which shortens the operation time, reduces the risk of anesthesia, and allows the dog to recover faster after surgery.     Contact Us: service@surgsci.com Our Website: https://www.surgscience.com/ WhatsApp: +86-15826764336   About Surgsci Surgsci Medical Ltd. aims to improve people's health and quality of life. We adhere to the mission of independent research and development, popularize minimally invasive medical technology, and share high-quality humanistic care. Through clinical practice, we innovate in technology to benefit patients, medical staff, and medical institutions. We provide holistic innovative solutions for hepatobiliary and gastrointestinal surgery, ENT surgery, colorectal surgery, bariatric surgery, oncology, urology, thoracic surgery, women's and children's surgery, neurosurgery, etc. We are in Shenzhen, Guangdong. Founded in 2017, Surgsci is a national high-tech enterprise, focusing on the innovation for smart consumables for minimally invasive surgery. We are specialized in the production of laparoscopic surgical instruments, including disposable laparoscopic trocars and ultrasonic scalpels etc. We own two factories in Pingshan and Bao’an District, a total of about 1500 square meters of R&D office and 4000 square meters of GMP clean workshop with ISO13485. We integrate design, R&D, manufacturing, and sales. At present, we have more than 40 authorized patents at home and abroad. The products have obtained CE & FDA and are sold to nearly 30 countries in Europe, Asia, the Middle East, and South America. We Provide high quality OEM and ODM services which are recognized and favored by our customers. Looking forward to your inquiry and cooperation.

The Advantages of Laparoscopic Surgery   Laparoscopic surgery is a minimally invasive procedure. Its development eases the pain of surgery for patients, shortens the recovery period of patients, and relatively reduces the cost. It is a surgical project that has developed rapidly in recent years. Laparoscopic surgery has several advantages compared to traditional surgery.   1. Reduce the Risk of Bleeding During Surgery The advantage of laparoscopic surgery is that large open wounds or incisions can be avoided, thereby reducing blood loss, pain and discomfort. Laparoscopic surgery mainly uses electric shock and coagulation. The blood vessels are coagulated and then incised, and the amount of bleeding is very small.   2. Reduce Postoperative Pain Laparotomy can create larger surgical wound, as short as 8cm and as long as 15-20cm. However, in a laparoscopy, only small holes are punched. The pain is lessened and the recovery is fast after surgery.   3. Small Surgical Trauma Compared with traditional open surgery, laparoscopic abdominal wounds are smaller and muscles are generally not injured during the operation. When the wound needs to be expanded under special circumstances, the muscle is usually not broken, and the trauma to the body is very small. This also prevents scar tissue infections and hernias from developing.   4. Short Hospital Stay Laparoscopic surgery is minimally invasive, with less touch to the digestive tract and organs in the entire abdominal cavity, and the traction injury is small. The patient experienced rapid exhaustion after the operation. They can eat normally after exhaustion and could be discharged from the hospital early. In open surgery, especially complex combined organectomy, patients have a relatively long time to pass gas.   5. Small Abdominal Incision Scar Most of the laparoscopic surgery adopts two-port and four-port technique. One of the port is opened on the belly button to avoid leaving long scars in the abdominal cavity of the patient. After recovery, only 1-3 incision scars of 0.5-1cm long are left in the abdominal cavity. Because of the small surgical wound and less pain, the laparoscopic surgery is also called ‘keyhole’ surgery.   About Surgsci Surgsci Medical Ltd. aims to improve people's health and quality of life. We adhere to the mission of independent research and development, popularize minimally invasive medical technology, and share high-quality humanistic care. Through clinical practice, we innovate in technology to benefit patients, medical staff, and medical institutions. We provide holistic innovative solutions for hepatobiliary and gastrointestinal surgery, ENT surgery, colorectal surgery, bariatric surgery, oncology, urology, thoracic surgery, women's and children's surgery, neurosurgery, etc. We are in Shenzhen, Guangdong. Founded in 2017, Surgsci is a national high-tech enterprise, focusing on the innovation for smart consumables for minimally invasive surgery. We are specialized in the production of laparoscopic surgical instruments, including disposable laparoscopic trocars and ultrasonic scalpels etc. We own two factories in Pingshan and Bao’an District, a total of about 1500 square meters of R&D office and 4000 square meters of GMP clean workshop with ISO13485. We integrate design, R&D, manufacturing, and sales. At present, we have more than 40 authorized patents at home and abroad. The products have obtained CE & FDA and are sold to nearly 30 countries in Europe, Asia, the Middle East, and South America. We Provide high quality OEM and ODM services which are recognized and favored by our customers. Looking forward to your inquiry and cooperation.

What is laparoscopic surgery? Laparoscopic surgery is a method of surgery through laparoscopic equipment, and it is a minimally invasive method for the treatment of abdominal diseases developed in the past 20-30 years. The laparoscopic equipment in the operation mainly includes pneumoperitoneum machine, projection screen, expansion equipment operated by the doctor, etc.   The principle is to inject inert gas (usually carbon dioxide) into the abdominal cavity, inflate the abdominal cavity, make several small incisions with a diameter of 5-12mm in different parts of the abdomen through the corresponding optical equipment, and insert the laparoscopic lens through the trocars. Through the images of different angles of the patient's organs displayed on the monitor screen, the doctor explores various parts of the abdominal cavity, analyzes and judges the patient's condition, and then uses long instruments to enter the abdominal cavity through the abdominal wall for surgery.   Laparoscopic surgery is widely used in various departments. Through the magnification of the laparoscope, doctors can more clearly understand the anatomical relationship around the lesion, thereby reducing trauma and allowing patients to recover quickly after surgery.   What is a laparoscopy? Laparoscopy is an exploratory procedure using a laparoscope. A laparoscope is an instrument with a tiny imaging device that is passed through the abdominal wall and placed into the abdominal cavity. Doctors can directly see the real-time situation in the abdominal cavity captured by the camera on the monitor, analyze the condition, and use special instruments for surgical treatment. Laparoscopy requires 2-4 holes in the abdominal wall to operate, one of which is on the navel, and the diameter of each hole is about 1-2cm. Laparoscopic surgery has relatively small wounds and quicker postoperative recovery.   What surgeries are performed laparoscopically? In recent years, minimally invasive surgery has developed rapidly, with the advantages of less trauma, faster recovery, less pain, and higher cure rate. As a representative of minimally invasive surgery, laparoscopy is widely used in the field of surgery. Laparoscopy involves a variety of diseases and surgeries and is popular with patients. With the continuous advancement of science and technology and the improvement and innovation of surgical instruments, the scope of using laparoscopy will become wider and wider.   By Samuel Bendet, US Air Force, via Wikimedia Commons   Laparoscopic surgery can be used for various procedures which include:   Removal of the gallbladder. This is sometimes called a laparoscopic cholecystectomy, or 'lap choly', for short. It is now the most common way for a gallbladder to be removed, usually for gallstones which are causing pain. Removal of the appendix. Removal of patches of endometriosis. Removal of parts of the intestines. Female sterilisation. Treating ectopic pregnancy. Taking a biopsy of various structures inside the abdomen, which can be looked at under the microscope and/or tested in other ways.   What are the advantages of laparoscopic surgery? 1. Small surgical trauma; 2. Patients recover quickly after surgery; 3. Short hospital stay; 4. The patient has mild postoperative pain; 5. Small abdominal incision scar; 6. The therapeutic effect is the same as that of laparotomy.

In this article, you'll learn what cat spaying is, why you should neuter your cat, the procedure steps, and what you need to know about it. Hope this information is helpful and wish you a healthy and happy kitten.   1. What is cat spay? Cat spay is the removal of the female cat's uterus and ovaries.   2. What are the benefits of spaying a cat? (1) Spaying can reduce estrus in cats. (2) Disease prevention. Spaying can effectively prevent cats from developing uterine infections, uterine cancers, and breast cancer. (3) Change the cat's personality. After a cat has been spaying, its temperament will become more docile.   3. Best age to spay a cat Most international authorities believe that spaying should be done before sexual maturity (a female cat in heat means sexual maturity). Cat owners can wait until the female cat is 6 months old and take the female cat to the veterinary hospital for neutering.   4. When is surgery not suitable? (1) When in heat: When a female cat is in heat, the blood vessels supplying the ovaries and uterus will become thicker, thereby increasing the risk of bleeding during surgery, so it is usually recommended to spay 1-2 weeks after estrus. (2) sickness (3) Just arrived in the new environment   5. What is the procedure for cat spay surgery? (1) Fasting for 6-8 hours before surgery (recommended time varies by vet) (2) Go to the veterinarian for preoperative examination (3) Surgical removal of the uterus and ovaries (4) Waiting for recovery from anesthesia, after being evaluated by the anesthesiologist, you can take the cat home and follow the vet’s advice for nursing.   6. What complications may occur after spaying? (1) Common but minor complications, such as gastrointestinal discomfort, wound infection, granuloma formation, fat liquefaction, etc. (2) For rare but serious complications, such as frequent vomiting, poor mental state, weakness, poor blood color, etc., please contact the vet in time when these problems occur.   7. How to take care of the cat after spay surgery? Help the cat to wear a cat cone, and don't let it lick the wound, otherwise it will easily lead to wound infection.   8. Is the smaller the surgical incision the better? Appropriate incisions are fine. Do not pursue small incisions too much. Excessive pursuit of small incisions may cause problems such as excessive traction and tissue residue during the operation.   9. Is minimally invasive surgery recommended? Minimally invasive surgery has a smaller incision and is recommended.   10. Is it possible to cut the ovaries only or the cutthe uterus? No, because the remaining uterus or ovaries are prone to lesions over time.   11. Why is the female cat still in heat after spaying? It is normal for cats to be in heat when they are just spayed. However, if estrus persists for a long time after spaying, it is recommended to go to the vet for examination. Common reasons are as follows:   (1) Residual ovarian syndrome Spaying is to remove the uterus and ovaries on both sides, but sometimes part of the ovarian tissue may be missed, or in rare cases, the cat has multiple ovaries.It causes the cat to return to estrus. If ovarian remnant syndrome is confirmed, surgical removal of the remaining ovarian tissue is usually required, and the prognosis is generally good, with few recurrences of estrus. (2) Exposure to exogenous estrogen (3) Increased secretion of sex hormones (caused by lesions of the reticular band of the adrenal cortex) (4) Adrenal cortical carcinoma   12. Can medicine replace spay surgery? It needs to be used for a long time, and it has great side effects, which is not worth the loss, so it is not recommended.   About Surgsci Surgsci Medical Ltd. aims to improve people's health and quality of life. We adhere to the mission of independent research and development, popularize minimally invasive medical technology, and share high-quality humanistic care. Through clinical practice, we innovate in technology to benefit patients, medical staff, and medical institutions. We provide holistic innovative solutions for hepatobiliary and gastrointestinal surgery, ENT surgery, colorectal surgery, bariatric surgery, oncology, urology, thoracic surgery, women's and children's surgery, neurosurgery, etc. We are in Shenzhen, Guangdong. Founded in 2017, Surgsci is a national high-tech enterprise, focusing on the innovation for smart consumables for minimally invasive surgery. We are specialized in the production of laparoscopic surgical instruments, including disposable laparoscopic trocars and ultrasonic scalpels etc. We own two factories in Pingshan and Bao’an District, a total of about 1500 square meters of R&D office and 4000 square meters of GMP clean workshop with ISO13485. We integrate design, R&D, manufacturing, and sales. At present, we have more than 40 authorized patents at home and abroad. The products have obtained CE & FDA and are sold to nearly 30 countries in Europe, Asia, the Middle East, and South America. We Provide high quality OEM and ODM services which are recognized and favored by our customers. Looking forward to your inquiry and cooperation.

Cat spay is the removal of the female cat's uterus and ovaries.   The procedure for cat spay surgery: (1) Fasting for 6-8 hours before surgery (recommended time varies by vet) (2) Go to the veterinarian for preoperative examination (3) Surgical removal of the uterus and ovaries (4) Waiting for recovery from anesthesia, after being evaluated by the anesthesiologist, you can take the cat home and follow the vet’s advice for nursing.     Surgsci pet ultrasonic scalpel is used in this video for cat spay. It has following advantages: 1. Fast cut and hemostasis 2. Easy handling save operation time 3. Seamless thread prevent infection 4. Small wound brings fast recovery 5. Less smoke to create clear visualization For more information please visit: https://www.surgscience.com/ Email: service@surgsci.com WhatsApp: +86-15826764336

Veterinary Ultrasonic Scalpel System For Pets Surgery Ligasure Instruments The following video shows the advantages of veterinary ultrasonic scalpel system for pets surgery made by Surgsci.   ecer({videoId:"YqAfL5aJJEs",idContainer:"#gHXTuYT"})   Compare to traditional surgeries, the pet surgery with Surgsci ultrasonic scalpels has advantages of: 1. Fast-Cut and Hemostasis 2. Short Operation Time-Easy Handling 3. Seamless Thread-Infection Prevention 4. Small Wounds-Fast Recovery 5. Less Smoke-Clear Visualization     Ultrasonic scalpel vessel ligation and dissection device is the best solution for pet disinfection, ultrasonic technology is used in pet care.   Ultrasonic scalpels have ultra-high frequencies and tiny amplitudes to rapidly cut tissue. After the energy of the blade tip is excited, the surrounding tissue produces cavitation. Protein hydrogen bonds in tissue are broken and then solidified and denatured. It is the best solution for modern surgery, combining cutting and coagulation in one.     About Surgsci: Surgsci Medical Ltd. was established in April 2017 in Bao 'an District of Shenzhen City. And Shenzhen InnoSurg Medical Technology Co.,ltd is the Manufacture center of Surgsci Medical ltd. It was founded by senior engineer, marketing, and sales personnel in the medical device industry. At present, it has about 600 square meters of research and development office space and 1600 square meters of GMP clean workshop. Since its establishment, the company has employed many excellent clinical experts as product consultants to develop innovative medical devices. The company adheres to the concept of making surgical operations safer, more efficient, simpler and more intelligent. It focuses on the research and development of minimally invasive surgical instruments and personalized surgical overall solutions.

Advantages of Ultrasonic Scalpels | Introduction of Surgsci Self-Developed G500 Ultrasonic Scalpel System   ecer({videoId:"VOMVdJxpu5o",idContainer:"#mwQVoFs"})   The ultrasonic scalpel devices developed by Surgsci has main advantages as follows:   Easily assembled 360° rotation knob Stable and reliable vessel sealing capacity with excellent cutting speed and sutureless technique High energy efficiency to reduce tissue damage around vital structures Special blade coating materials effectively prevents tissue adhesions   Please contact surgsci@service.com for more information. Our website: https://www.surgscience.com   About Surgsci: Surgsci Medical Ltd. aims to improve people's health and quality of life. We adhere to the mission of independent research and development, popularize minimally invasive medical technology, and share high-quality humanistic care. Through clinical practice, we innovate in technology to benefit patients, medical staff, and medical institutions. We provide holistic innovative solutions for hepatobiliary and gastrointestinal surgery, ENT surgery, colorectal surgery, bariatric surgery, oncology, urology, thoracic surgery, women's and children's surgery, neurosurgery, etc.   We are in Shenzhen, Guangdong. Founded in 2017, Surgsci is a national high-tech enterprise, focusing on the innovation for smart consumables for minimally invasive surgery. We are specialized in the production of laparoscopic surgical instruments, including disposable laparoscopic trocars and ultrasonic scalpels etc. We own factories with a total of about 1500 square meters of R&D office and 4000 square meters of GMP clean workshop with ISO13485.   We integrate design, R&D, manufacturing, and sales. At present, we have more than 40 authorized patents at home and abroad. The products have obtained CE & FDA and are sold to nearly 30 countries in Europe, Asia, the Middle East, and South America. We Provide high quality OEM and ODM services which are recognized and favored by our customers. Looking forward to your inquiry and cooperation.

Wondering what a research lab at the Laparoscopic Instrument Factory looks like. The video below shows the daily work of our laboratory staff. https://www.youtube.com/watch?v=W33pN6z26as Surgsci is a professional manufacturer of disposable laparoscopic trocars and ultrasonic scalpel device in China. There are four of our main products: disposable laparoscopic trocars, ultrasonic scalpels, veress needles and specimen pouches. More on Surgsci please visit our website: https://www.surgscience.com/     About Surgsci Surgsci Medical Ltd. aims to improve people's health and quality of life. We adhere to the mission of independent research and development, popularize minimally invasive medical technology, and share high-quality humanistic care. Through clinical practice, we innovate in technology to benefit patients, medical staff, and medical institutions. We provide holistic innovative solutions for hepatobiliary and gastrointestinal surgery, ENT surgery, colorectal surgery, bariatric surgery, oncology, urology, thoracic surgery, women's and children's surgery, neurosurgery, etc.   We are in Shenzhen, Guangdong. Founded in 2017, Surgsci is a national high-tech enterprise, focusing on the innovation for smart consumables for minimally invasive surgery. We are specialized in the production of laparoscopic surgical instruments, including disposable laparoscopic trocars and ultrasonic scalpels etc. We own two factories in Pingshan and Bao’an District, a total of about 1500 square meters of R&D office and 4000 square meters of GMP clean workshop with ISO13485.   We integrate design, R&D, manufacturing, and sales. At present, we have more than 40 authorized patents at home and abroad. The products have obtained CE & FDA and are sold to nearly 30 countries in Europe, Asia, the Middle East, and South America. We Provide high quality OEM and ODM services which are recognized and favored by our customers. Looking forward to your inquiry and cooperation.

Dear customer, we will celebrate the National Day holiday from October 1st to October 7th, and start work on October 8th. To contact us, please call +8618938089701 or email surgci@service.com. We will get back to you as soon as possible. Thank you for your understanding and wish you a happy life. About Surgsci Surgsci Medical Ltd. aims to improve people's health and quality of life. We adhere to the mission of independent research and development, popularize minimally invasive medical technology, and share high-quality humanistic care. Through clinical practice, we innovate in technology to benefit patients, medical staff, and medical institutions. We provide holistic innovative solutions for hepatobiliary and gastrointestinal surgery, ENT surgery, colorectal surgery, bariatric surgery, oncology, urology, thoracic surgery, women's and children's surgery, neurosurgery, etc. We are in Shenzhen, Guangdong. Founded in 2017, Surgsci is a national high-tech enterprise, focusing on the innovation for smart consumables for minimally invasive surgery. We are specialized in the production of laparoscopic surgical instruments, including disposable laparoscopic trocars and ultrasonic scalpels etc. We own two factories in Pingshan and Bao’an District, a total of about 1500 square meters of R&D office and 4000 square meters of GMP clean workshop with ISO13485. We integrate design, R&D, manufacturing, and sales. At present, we have more than 40 authorized patents at home and abroad. The products have obtained CE & FDA and are sold to nearly 30 countries in Europe, Asia, the Middle East, and South America. We Provide high quality OEM and ODM services which are recognized and favored by our customers. Looking forward to your inquiry and cooperation.  

  ecer({videoId:"96ZKUvFEImE",idContainer:"#ymtxeJT"})   We are a professional manufacturer and supplier of disposable laparoscopic trocars and ultrasonic scalpel equipment in China. The video shows our factory and some of the equipment we use. We use the most advanced equipment and technology to ensure that our products are of first-class quality and stable control. At present, our products have passed CE and FDA certification. Our disposable laparoscopic trocars and ultrasonic scalpels are sold all over the world, including nearly 30 countries in Europe, Asia, Middle East, South America, etc. The laparoscopic instruments produced and developed by us have been well received by domestic and foreign customers, making minimally invasive surgery more convenient and safer, and bringing patients a better surgical experience. We will continue to popularize minimally invasive technology and look forward to cooperating with you. More on Surgsci: Laparoscopic Disposable Trocars: https://www.disposabletrocar.com/supplier-425207-disposable-laparoscopic-trocar Ultrasonic Scapels: https://www.disposabletrocar.com/supplier-425212-ultrasonic-scalpel-system   About Surgsci Surgsci Medical Ltd. aims to improve people's health and quality of life. We adhere to the mission of independent research and development, popularize minimally invasive medical technology, and share high-quality humanistic care. Through clinical practice, we innovate in technology to benefit patients, medical staff, and medical institutions. We provide holistic innovative solutions for hepatobiliary and gastrointestinal surgery, ENT surgery, colorectal surgery, bariatric surgery, oncology, urology, thoracic surgery, women's and children's surgery, neurosurgery, etc. We are in Shenzhen, Guangdong. Founded in 2017, Surgsci is a national high-tech enterprise, focusing on the innovation for smart consumables for minimally invasive surgery. We are specialized in the production of laparoscopic surgical instruments, including disposable laparoscopic trocars and ultrasonic scalpels etc. We own two factories in Pingshan and Bao’an District, a total of about 1500 square meters of R&D office and 4000 square meters of GMP clean workshop with ISO13485. We integrate design, R&D, manufacturing, and sales. At present, we have more than 40 authorized patents at home and abroad. The products have obtained CE & FDA and are sold to nearly 30 countries in Europe, Asia, the Middle East, and South America. We Provide high quality OEM and ODM services which are recognized and favored by our customers. Looking forward to your inquiry and cooperation.

  ecer({videoId:"mImVZpKbIRg",idContainer:"#BUqmPik"})   Surgsci offers a manufacturing environment of over about 1500 square meters of R&D office and 4000 square meters of GMP clean workshop with ISO13485 certification. Our factories and labs are equipped with the latest technology available for the laparoscopic surgical instruments. By enhancing our production and R&D capabilities, we are able to become a full-service provider for the medical industry. In addition to laparoscopic instruments, Surgsci also offers OEM and ODM services. We are able to work with each client to meet stringent design criteria and develop products designed for performance and functionality. Our quality management system is integrated into every step of the production process, ensuring consistent products that meet or exceed customer expectations. Learn more about Surgsci products on our website: http://www.disposabletrocar.com/ About Surgsci Surgsci Medical Ltd. aims to improve people's health and quality of life. We adhere to the mission of independent research and development, popularize minimally invasive medical technology, and share high-quality humanistic care. Through clinical practice, we innovate in technology to benefit patients, medical staff, and medical institutions. We provide holistic innovative solutions for hepatobiliary and gastrointestinal surgery, ENT surgery, colorectal surgery, bariatric surgery, oncology, urology, thoracic surgery, women's and children's surgery, neurosurgery, etc. We are in Shenzhen, Guangdong. Founded in 2017, Surgsci is a national high-tech enterprise, focusing on the innovation for smart consumables for minimally invasive surgery. We are specialized in the production of laparoscopic surgical instruments, including disposable laparoscopic trocars and ultrasonic scalpels etc. We own factories, a total of about 1500 square meters of R&D office and 4000 square meters of GMP clean workshop with ISO13485. We integrate design, R&D, manufacturing, and sales. At present, we have more than 40 authorized patents at home and abroad. The products have obtained CE & FDA and are sold to nearly 30 countries in Europe, Asia, the Middle East, and South America. We Provide high quality OEM and ODM services which are recognized and favored by our customers. Looking forward to your inquiry and cooperation.

  ecer({videoId:"52VCrDYFL4I",idContainer:"#qsXVjvR"}) Testing Lab | Surgsci | Trocar | Puncture test | Trocar Atomization | Package Testing   This video shows the experiments carried out in Surgsci's laboratory, including the puncture experiment of the trocar, the atomization process of trocars, and the test of the carton packaging of the ultrasonic scalpels.   Surgsci has about 1500 square meters of R&D offices and laboratories. Our testers are experienced, follow a rigorous workflow, and have undergone multiple tests and verifications to ensure the high quality and stability of the product.   For more on Surgsci visit: https://www.disposabletrocar.com/    About Surgsci Surgsci Medical Ltd. aims to improve people's health and quality of life. We adhere to the mission of independent research and development, popularize minimally invasive medical technology, and share high-quality humanistic care. Through clinical practice, we innovate in technology to benefit patients, medical staff, and medical institutions. We provide holistic innovative solutions for hepatobiliary and gastrointestinal surgery, ENT surgery, colorectal surgery, bariatric surgery, oncology, urology, thoracic surgery, women's and children's surgery, neurosurgery, etc.   We are in Shenzhen, Guangdong. Founded in 2017, Surgsci is a national high-tech enterprise, focusing on the innovation for smart consumables for minimally invasive surgery. We are specialized in the production of laparoscopic surgical instruments, including disposable laparoscopic trocars and ultrasonic scalpels etc. We own two factories, a total of about 1500 square meters of R&D office and 4000 square meters of GMP clean workshop with ISO13485.   We integrate design, R&D, manufacturing, and sales. At present, we have more than 40 authorized patents at home and abroad. The products have obtained CE & FDA and are sold to nearly 30 countries in Europe, Asia, the Middle East, and South America. We Provide high quality OEM and ODM services which are recognized and favored by our customers. Looking forward to your inquiry and cooperation.

Surgsci Factory | Medical Device Manufacturing | Laparoscopic Trocars Supplier   Walking through the Surgsci Factory　▶https://youtu.be/e6Qr_gf47Jw   We are a manufacturer of disposable laparoscopic trocars and ultrasonic scalpels in China. Here shows the process of us making ultrasonic scalpels and laparoscopic trocars.     More on Surgsci

  ecer({videoId:"sJDpS2eMudU",idContainer:"#YAOiUAc"})   Take a look behind the scenes at Surgsci R&D lab in Shenzhen, China.   Here you will see some of the product development processes used by Surgsci. At present, it has about 600 square meters of research and development office space. The company adheres to the concept of making surgical operations safer, more efficient, simpler and more intelligent. It focuses on the research and development of minimally invasive surgical instruments and personalized surgical overall solutions.   For more on Surgsci visit: https://www.disposabletrocar.com/   About Surgsci Surgsci Medical Ltd. aims to improve people's health and quality of life. We adhere to the mission of independent research and development, popularize minimally invasive medical technology, and share high-quality humanistic care. Through clinical practice, we innovate in technology to benefit patients, medical staff, and medical institutions. We provide holistic innovative solutions for hepatobiliary and gastrointestinal surgery, ENT surgery, colorectal surgery, bariatric surgery, oncology, urology, thoracic surgery, women's and children's surgery, neurosurgery, etc. We are in Shenzhen, Guangdong.   Founded in 2017, Surgsci is a national high-tech enterprise, focusing on the innovation for smart consumables for minimally invasive surgery. We are specialized in the production of laparoscopic surgical instruments, including disposable laparoscopic trocars and ultrasonic scalpels etc. We own two factories, a total of about 1500 square meters of R&D office and 4000 square meters of GMP clean workshop with ISO13485. We integrate design, R&D, manufacturing, and sales.   At present, we have more than 40 authorized patents at home and abroad. The products have obtained CE & FDA and are sold to nearly 30 countries in Europe, Asia, the Middle East, and South America. We Provide high quality OEM and ODM services which are recognized and favored by our customers. Looking forward to your inquiry and cooperation.

Trocar Kit Package Size | Carton Dimensions and Capacity | Surgsci   To meet the needs of more doctors and surgical patients, we offer customizable trocar kit services. Here is the packaging of our trocar kit and the capacity of each shipping box. Take TV02 and TV28 as references.   TV02: Endopass(Optical Trocar)-5mm obturator*1+5mm cannula*2+Veress Needle*1+Endobag*1 TV28: Endopass (Optical Trocar)-(5mm+10mm+12mm)obturator*1+5mm cannula *1+10mm cannula*2+12mm cannula*2+veress needles*1+Endobag*1     More trocar kit models are available: https://www.disposabletrocar.com/supplier-425777-disposable-trocar-kit   About Surgsci Surgsci Medical Ltd. aims to improve people's health and quality of life. We adhere to the mission of independent research and development, popularize minimally invasive medical technology, and share high-quality humanistic care. Through clinical practice, we innovate in technology to benefit patients, medical staff, and medical institutions. We provide holistic innovative solutions for hepatobiliary and gastrointestinal surgery, ENT surgery, colorectal surgery, bariatric surgery, oncology, urology, thoracic surgery, women's and children's surgery, neurosurgery, etc.   We are in Shenzhen, Guangdong. Founded in 2017, Surgsci is a national high-tech enterprise, focusing on the innovation for smart consumables for minimally invasive surgery. We are specialized in the production of laparoscopic surgical instruments, including disposable laparoscopic trocars and ultrasonic scalpels etc. We own two factories in Pingshan and Bao’an District, a total of about 1500 square meters of R&D office and 4000 square meters of GMP clean workshop with ISO13485. We integrate design, R&D, manufacturing, and sales.   At present, we have more than 40 authorized patents at home and abroad. The products have obtained CE & FDA and are sold to nearly 30 countries in Europe, Asia, the Middle East, and South America. We Provide high quality OEM and ODM services which are recognized and favored by our customers. Looking forward to your inquiry and cooperation.    

https://www.youtube.com/watch?v=U6v7QsCfL0k We are one of leading disposable laparoscopic instruments manufacturers in Shenzhen, Guangdong China. We are specialized in the production of laparoscopic surgical instruments, including disposable laparoscopic trocars and ultrasonic scalpels etc. We own two factories, including a total of about 1500 square meters of R&D office and 4000 square meters of GMP clean workshop with ISO13485 certification.   We integrate design, R&D, manufacturing, and sales. At present, we have more than 50 authorized patents at home and abroad. The products have obtained CE & FDA and are sold to nearly 30 countries in Europe, Asia, the Middle East, and South America. We provide high quality OEM and ODM services which are recognized and favored by our customers. Looking forward to your inquiry and cooperation.   Web: https://www.disposabletrocar.com/ Email: service@surgsci.com

We have been designing and manufacturing disposable laparoscopic trocars since 2017. Our current trocars cover 6 series and over 20 different sizes. Also, we can customize trocars according to your requirements.   6 Series: Optical Trocar/ Bladeless Trocar/ Bladed Trocar/ Blunt Trocar/ Hasson Trocar/ Valveless Trocar 20 Sizes: 5mm, 10mm, 12mm Trocars with 75/ 100/ 150mm Sleeves MOQ: 1 Set Certificates: CE, ISO, FDA Free Samples   Looking forward to your inquiry, please contact service@surgsci.com or visit: http://www.disposabletrocar.com/ for more information.   About Surgsci   Surgsci Medical Ltd. aims to improve people's health and quality of life. We adhere to the mission of independent research and development, popularize minimally invasive medical technology, and share high-quality humanistic care. Through clinical practice, we innovate in technology to benefit patients, medical staff, and medical institutions. We provide holistic innovative solutions for hepatobiliary and gastrointestinal surgery, ENT surgery, colorectal surgery, bariatric surgery, oncology, urology, thoracic surgery, women's and children's surgery, neurosurgery, etc.   We are in Shenzhen, Guangdong. Founded in 2017, Surgsci is a national high-tech enterprise, focusing on the innovation for smart consumables for minimally invasive surgery. We are specialized in the production of laparoscopic surgical instruments, including disposable laparoscopic trocars and ultrasonic scalpels etc. We own two factories in Pingshan and Bao’an District, a total of about 1500 square meters of R&D office and 4000 square meters of GMP clean workshop with ISO13485.   We integrate design, R&D, manufacturing, and sales. At present, we have more than 40 authorized patents at home and abroad. The products have obtained CE & FDA and are sold to nearly 30 countries in Europe, Asia, the Middle East, and South America. We Provide high quality OEM and ODM services which are recognized and favored by our customers. Looking forward to your inquiry and cooperation.

https://www.youtube.com/watch?v=ahFw7x6yQpE This video is about our trocar package and carton sizes. Take 100mm and 150mm Length Optical Trocars as examples. For more detailed information, please email: service@surgsci.com.     About Surgsci   Surgsci Medical Ltd. aims to improve people's health and quality of life. We adhere to the mission of independent research and development, popularize minimally invasive medical technology, and share high-quality humanistic care. Through clinical practice, we innovate in technology to benefit patients, medical staff, and medical institutions. We provide holistic innovative solutions for hepatobiliary and gastrointestinal surgery, ENT surgery, colorectal surgery, bariatric surgery, oncology, urology, thoracic surgery, women's and children's surgery, neurosurgery, etc.   We are in Shenzhen, Guangdong. Founded in 2017, Surgsci is a national high-tech enterprise, focusing on the innovation for smart consumables for minimally invasive surgery. We are specialized in the production of laparoscopic surgical instruments, including disposable laparoscopic trocars and ultrasonic scalpels etc. We own two factories in Pingshan and Bao’an District, a total of about 1500 square meters of R&D office and 4000 square meters of GMP clean workshop with ISO13485.   We integrate design, R&D, manufacturing, and sales. At present, we have more than 40 authorized patents at home and abroad. The products have obtained CE & FDA and are sold to nearly 30 countries in Europe, Asia, the Middle East, and South America. We Provide high quality OEM and ODM services which are recognized and favored by our customers. Looking forward to your inquiry and cooperation.

https://youtu.be/0Cg8Not7mP0   Congratulations to Surgsci ultrasonic scalpel for being selected as the centralized procurement project of medical consumables in Anhui Province, China.   At present, Surgsci's fourth-generation ultrasonic scalpel has been selected for centralized procurement in 18 provinces across the country.   Ultrasonic Scalpel System: http://mao.ecer.com/test/disposabletrocar.com/sale-13990978-medical-instrument-ultrasonic-scalpel-ligasure-system-for-cutting-and-hemostasis.html   About Surgsci   Surgsci Medical Ltd. aims to improve people's health and quality of life. We adhere to the mission of independent research and development, popularize minimally invasive medical technology, and share high-quality humanistic care. Through clinical practice, we innovate in technology to benefit patients, medical staff, and medical institutions. We provide holistic innovative solutions for hepatobiliary and gastrointestinal surgery, ENT surgery, colorectal surgery, bariatric surgery, oncology, urology, thoracic surgery, women's and children's surgery, neurosurgery, etc.   We are in Shenzhen, Guangdong. Founded in 2017, Surgsci is a national high-tech enterprise, focusing on the innovation for smart consumables for minimally invasive surgery. We are specialized in the production of laparoscopic surgical instruments, including disposable laparoscopic trocars and ultrasonic scalpels etc. We own two factories in Pingshan and Bao’an District, a total of about 1500 square meters of R&D office and 4000 square meters of GMP clean workshop with ISO13485.   We integrate design, R&D, manufacturing, and sales. At present, we have more than 40 authorized patents at home and abroad. The products have obtained CE & FDA and are sold to nearly 30 countries in Europe, Asia, the Middle East, and South America. We Provide high quality OEM and ODM services which are recognized and favored by our customers. Looking forward to your inquiry and cooperation.

Surgsci wishes everyone a Happy Mid-Autumn Festival!     ecer({videoId:"sMJ18YQ3eQg",idContainer:"#xWBRgZR"})   About Surgsci Surgsci Medical Ltd. aims to improve people's health and quality of life. We adhere to the mission of independent research and development, popularize minimally invasive medical technology, and share high-quality humanistic care. Through clinical practice, we innovate in technology to benefit patients, medical staff, and medical institutions. We provide holistic innovative solutions for hepatobiliary and gastrointestinal surgery, ENT surgery, colorectal surgery, bariatric surgery, oncology, urology, thoracic surgery, women's and children's surgery, neurosurgery, etc.   We are in Shenzhen, Guangdong. Founded in 2017, Surgsci is a national high-tech enterprise, focusing on the innovation for smart consumables for minimally invasive surgery. We are specialized in the production of laparoscopic surgical instruments, including disposable laparoscopic trocars and ultrasonic scalpels etc. We own two factories in Pingshan and Bao’an District, a total of about 1500 square meters of R&D office and 4000 square meters of GMP clean workshop with ISO13485.   We integrate design, R&D, manufacturing, and sales. At present, we have more than 40 authorized patents at home and abroad. The products have obtained CE & FDA and are sold to nearly 30 countries in Europe, Asia, the Middle East, and South America. We Provide high quality OEM and ODM services which are recognized and favored by our customers. Looking forward to your inquiry and cooperation.

https://youtu.be/YhpDrhDfRII   In the 11th World Endoscopy Society Hepatobiliary Gastrointestinal Minimally Invasive Surgery Alliance Academic Forum, Professor Shao Zhijiang from Beijing University Binhai Hospital shared the application of fluorescence laparoscopy in hepatobiliary surgery. Professor Zhou Jingqiang from The Second People's Hospital of Shandong Province shared the demonstration of biliary surgery.   Reference: https://mp.weixin.qq.com/s/PRr2VxKfuO-80GNyr3CT4A

On September 1, 2022, the 11th World Endoscopy Society Hepatobiliary and Gastrointestinal Minimally Invasive Surgery Alliance Academic Forum and the 33rd SAR Hepatobiliary and Gastrointestinal Surgery Forum were held in the form of an online meeting. 14 professors from Beijing, Shenzhen, Tianjin and Shandong attended the forum.   This academic forum focuses on the treatment of choledocholithiasis. Among them, seven professors made the following sharing: Professor Shao Zhijiang: Application of Fluorescence Laparoscopy in Hepatobiliary Surgery Professor Zhou Jingqiang: Demonstration of biliary surgery Professor Feng Qiushi: Controversial issues of endoscopic resection of duodenal papillary adenomas Professor Chen Jian: Experience of endoscopic bile duct removal through cystic duct microincision Professor Tang Di: Minimally invasive treatment of choledocholithiasis - our experience Professor Liu Shuang: Choice of minimally invasive treatment for common bile duct stones-ERCO? PTOBF? LCBDE? Professor He De: Progress and exploration of biliary dysfunction   During the meeting, the professors shared their experiences and held academic discussions on related issues. The meeting was a complete success. Looking forward to the participation of more doctors and the sharing of the treatment of hepatobiliary and gastrointestinal diseases.

Warmly celebrate that Surgsci ultrasonic scalpel and trocar have been selected into the centralized procurement project of medical consumables in Hebei Province.   About Surgsci Surgsci Medical Ltd. aims to improve people's health and quality of life. We adhere to the mission of independent research and development, popularize minimally invasive medical technology, and share high-quality humanistic care. Through clinical practice, we innovate in technology to benefit patients, medical staff, and medical institutions.   We provide holistic innovative solutions for hepatobiliary and gastrointestinal surgery, ENT surgery, colorectal surgery, bariatric surgery, oncology, urology, thoracic surgery, women's and children's surgery, neurosurgery, etc.   We are in Shenzhen, Guangdong. Founded in 2017, Surgsci is a national high-tech enterprise, focusing on the innovation for smart consumables for minimally invasive surgery. We are specialized in the production of laparoscopic surgical instruments, including disposable laparoscopic trocars and ultrasonic scalpels etc.   We own two factories in Pingshan and Bao’an District, a total of about 1500 square meters of R&D office and 4000 square meters of GMP clean workshop with ISO13485. We integrate design, R&D, manufacturing, and sales.   At present, we have more than 40 authorized patents at home and abroad. The products have obtained CE & FDA and are sold to nearly 30 countries in Europe, Asia, the Middle East, and South America. We Provide high quality OEM and ODM services which are recognized and favored by our customers. Looking forward to your inquiry and cooperation.

Ultrasonic scalpel vessel ligation and dissection device is the best solution for pet disinfection, ultrasonic technology is used in pet care. Ultrasonic scalpels have ultra-high frequencies and tiny amplitudes to rapidly cut tissue. After the energy of the blade tip is excited, the surrounding tissue produces cavitation. Protein hydrogen bonds in tissue are broken and then solidified and denatured. It is the best solution for modern surgery, combining cutting and coagulation in one.   5 Advantages:   1. Fast-Cut and Hemostasis 2. Short Operation Time-Easy Handling 3. Seamless Thread-Infection Prevention 4. Small Wounds-Fast Recovery 5. Less Smoke-Clear Visualization  

On August 19-20, 2022, Surgsci held an annual marketing communication and semi-annual summary meeting. About 30 members of the marketing department from all over the country came to the Shenzhen headquarters for a two-day meeting.   The main purpose of this meeting is to enhance the awareness and understanding among team members, increase the interaction between members of various marketing departments, promote learning and communication, and enhance team cohesion and centripetal force. During the meeting, sales representatives from all over the country visited the headquarters and factories of Surgsci, and jointly discussed the development plan. We also learned about the company's upcoming range of new products. The sales staff summarized the work content of the area in charge in the first half of the year, and made a reasonable plan for the work in the second half of the year.   The meeting was a complete success. Team members had a deeper understanding and communication with Surgsci and members of various departments. We hope that in the work in the second half of the year, we can see better performance of team members, promote Surgsci's products to more regions, and make our own contributions to the medical cause.   ecer({videoId:"GgBtMXyMd2U",idContainer:"#hJSdsnr"})

  ecer({videoId:"F6chhrt_Opc",idContainer:"#vWoFmIv"}) Our Ultrasonic Scalpel G500 for Laparoscopic Sleeve Gastrectomy   https://www.disposabletrocar.com/sale-13950466-surgical-instruments-integrated-ultrasonic-scalpel-for-laparoscopic-surgery.html During the 2nd China Obesity Week and the 2022 Academic Conference of the Metabolic Surgery Branch of the China Medical and Healthcare International Exchange Promotion Association held last week, Professor Xiaojiang Dai from Jinshazhou Hospital of Guangzhou University of Traditional Chinese Medicine conducted a live broadcast of laparoscopic sleeve gastrectomy. Surgsci's Ultrasonic Scalpel G500 is used in surgery. This video is a surgical clip.   The Main Features of Quality Ultrasonic Scalpel G500   1. Compatible with international mainstream ultrasonic scalpel systems. 2. The ultrasonic scalpel system can minimize adhesion eschar and smoke, it also can obtain a clear surgical field. 3. G500 integrates separation, cutting and coagulation, saving operation time. 4. One operation can close blood vessels or tissues within 5mm. 5. The operation is more efficient, faster, and less traumatic. It can also effectively stop bleeding during surgery.

  Inside the Factory | Trocar and Ultrasonic Scalpel Mannufacturer and Supplier | Surgsci 02   The photos below show the inside of our factory.      We are in Shenzhen, China. Founded in 2017, Surgsci is a national high-tech enterprise focusing on the innovation of intelligent consumables for minimally invasive surgery.     We have two factories in Pingshan District and Baoan District, Shenzhen.     There is a total of about 1,500 square meters of R&D offices and 4,000 square meters of GMP clean workshops that comply with ISO13485.         We integrate design, R&D, manufacturing, and sales.    At present, we have more than 40 authorized patents at home and abroad. The products have obtained CE & FDA and are sold to nearly 30 countries in Europe, Asia, the Middle East, and South America.  

Inside Surgsci’s headquarters.     Founded in 2017, Surgsci is a national high-tech enterprise, focusing on the innovation for smart consumables for minimally invasive surgery.     We are specialized in the production of laparoscopic surgical instruments, including disposable laparoscopic trocars and ultrasonic scalpels etc.     Our headquarters is located in Bao'an District, Shenzhen, with a good office environment and a well-equipped R&D center. We have received various awards for R&D, innovation, and product related. Look forward to working with you.    

The 10th World Endoscopy Doctors Association---Hepatobiliary Gastrointestinal Minimally Invasive Surgery Alliance Academic Forum was held online on August 6. This forum gathered more than 50 surgical experts and professors from Guangzhou and Shenzhen to share and discuss content related to NOSES&ERAS topics. This forum is divided into six chapters, including, NOSES topics; ERAS Topics; TaTME and NOSES Topics; Colorectal-NOSES Topics, etc. A total of 18 professors made academic sharing.  

The 9th academic forum of the Alliance of Hepatobiliary and Gastrointestinal Minimally Invasive Surgery of the World Association of Internal Diameter Physicians was held on July 22, 2022. This academic conference focuses on the surgical treatment of pancreatic cancer. 21 surgical experts and professors from Shenzhen, Dongguan, Huizhou, Heyuan and other places in Guangdong discussed and communicated through online conferences.   This meeting shared how to effectively ensure the recovery of nutritional needs after gastroenterectomy; the experience sharing of elderly LPD; the characteristics of diagnosis and treatment of small ampullary tumors; pancreatic exocrine insufficiency after upper gastrointestinal surgery; the latest understanding and diagnosis and treatment strategies of junctional resectable pancreatic cancer ; Experience sharing of comprehensive treatment of pancreatic cancer and case sharing of comprehensive treatment of pancreatic cancer.

Take a quick of our office in Shenzhen, China.   Our office is located in Bao'an District, Shenzhen, with a good office environment and a well-equipped R&D laboratory. We have a strong R&D team, a marketing team that provides high-quality services and a complete operating system.     We will be committed to improving people's health and quality of life, adhere to the mission of independent research and development, popularize minimally invasive medical technology, and share high-quality humanistic care. Through clinical practice, innovative technology, benefit patients, medical staff, medical institutions.    

How do we make an ultrasonic scalpel? This is one of a series of concise videos showing everyday life at the Surgsci factory. We are in Shenzhen, Guangdong. Founded in 2017, Surgsci is a national high-tech enterprise, focusing on the innovation for smart consumables for minimally invasive surgery. We are specialized in the production of laparoscopic surgical instruments, including disposable laparoscopic trocars and ultrasonic scalpels etc. We own two factories, a total of about 1500 square meters of R&D office and 4000 square meters of GMP clean workshop with ISO13485. We integrate design, R&D, manufacturing, and sales. At present, we have more than 40 authorized patents at home and abroad. The products have obtained CE & FDA and are sold to nearly 30 countries in Europe, Asia, the Middle East, and South America.  We Provide high quality OEM and ODM services which are recognized and favored by our customers. Looking forward to your inquiry and cooperation.  

A summit brings the national medical device industry to Shenzhen.   On July 29, the National High-Performance Medical Device Innovation Ecological Summit and Major Project Launch Event (hereinafter referred to as the "Summit") was held in Longhua District, Shenzhen. With the theme of "Innovation Leading, Industry Agglomeration", the summit is divided into four chapters: the trend of initiation, the power of empowerment, the voice of the frontier and the way of exploration. The summit invited well-known academicians, industry elites, and investment experts to jointly carry out cutting-edge academic exchanges, policy discussions, industrial cooperation and industry development trends. At the summit, the signing ceremony of a number of major projects was officially launched, and the high-profile "2022 China Top 100 High-Performance Medical Device Enterprises" list was announced, and Shenzhen Surgsci Medical Ltd. was included. At the same time, the selection of "2023 Top 50 List of National Innovation Forces and Medical Device Innovation Vitality" was announced. The event was broadcast live on Xinhuanet, with over 10 million viewers.

Vet Ultrasonic Scalpel Introduction | Surgsci     Here's our vet ultrosonic scalpel system introduction:   The vet ultrasonic scalpel is the best solution for pet disinfection. Ultrasonic technology is used in pet care.   Ultrasonic scalpels have ultra-high frequencies and tiny amplitudes to rapidly cut tissue. After the energy of the blade tip is excited, the surrounding tissue produces cavitation. Protein hydrogen bonds in tissue are broken and then solidified and denatured. It is the best solution for modern surgery, combining cutting and coagulation in one.   There are 5 big advantages   1. Fast-cut and hemostasis 2. Short operation time-easy handling 3. Seamless thread-infection prevention 4. Small wound-fast recovery 5. No smoke-clear visualization

Our History   We are in Shenzhen, Guangdong. Founded in 2017, Surgsci is a national high-tech enterprise, focusing on the innovation for smart consumables for minimally invasive surgery. We are specialized in the production of laparoscopic surgical instruments, including disposable laparoscopic trocars and ultrasonic scalpels etc. We own two factories in Pingshan and Bao’an District, a total of about 1500 square meters of R&D office and 4000 square meters of GMP clean workshop with ISO13485.   We integrate design, R&D, manufacturing, and sales. At present, we have more than 40 authorized patents at home and abroad. The products have obtained CE & FDA and are sold to nearly 30 countries in Europe, Asia, the Middle East, and South America. We Provide high quality OEM and ODM services which are recognized and favored by our customers. Looking forward to your inquiry and cooperation.   2017.04 SurgScience (Shenzhen) Medical Technology Co., Ltd. was established in Baoan District, Shenzhen.   2018.08. Shenzhen Innosurg Medical Technology Co., Ltd. was established in .Pingshan District, Shenzhen, and the GMP clean workshop was completed.   2019.12. Four products including disposable laparoscopic trocar passed CE audit, obtained CE certificate and EN ISO13485 system certification.     2021.05.Bao'an Manufacturing Center was put into use.   2021.10.“Ultrasonic Soft Tissue Cutting Hemostasis Equipment" .was certified.  

The 8th Academic Conference of the World Association of Endoscopy Hepatobiliary and Gastrointestinal Minimally Invasive Surgery Alliance and the 30th Special Zone Hepatobiliary and Gastrointestinal Surgery Forum is held at 3:00 pm on July 13th, 2022. Hepatobiliary and gastrointestinal surgeons from Shenzhen, Fujian, Guangxi and other places analyzed and discussed the cases of hepatobiliary and pancreatic surgery online. Surgsci also participated in this forum as a technical support. The forum brought together 14 famous professors of hepatobiliary and pancreatic surgery from major hospitals in Shenzhen, Fujian and Guangzhou, shared and discussed the following contents, including: Diagnosis and Treatment of Common Complications after Cholecystectomy; Complete Laparoscopic Pancreatoduodenum Case Sharing of Resection; Case Sharing of Extreme Liver Resection of S4, S7 and S8 Segments of Liver Cancer; Case sharing of Duodenopancreatic Head-Preserving Resection under Fluorescence Laparoscopy.   Reference: https://mp.weixin.qq.com/s/ZeAw3cPiTUGoJ2t1vOJnUQ https://shangzhibo.tv/watch/10794257?sharedBy=51578432&invitedBy=51578432

Surgsci Medical Ltd. attended the CMEF in Shenzhen from Oct.13-16.   We showed our main products: disposable trocars, ultrasonic scalpel for human surgery, veterinary ultrasonic scalpel and other products under development.       

  ecer({videoId:"yqmdN37fTS0",idContainer:"#AuoqfBY"})   The 2nd China Obesity Week and China Metabolic Surgery Forum will be held on June 24, 2022. During the conference, Professor Xiaojiang Dai from Jinshazhou Hospital of Guangzhou University of Traditional Chinese Medicine gave a live broadcast of laparoscopic sleeve gastrectomy. Surgsci's ultrasonic scalpel G500 was used for this procedure.   The G500 Ultrasonic Scalpel is one of Surgsci's flagship products. It has the following features to better help doctors to complete the operation. 1. Compatible with international mainstream ultrasonic scalpel system; 2. Minimize adhensions, eschar and smog; 3. Integrate separation, cutting and coagulation to save operation time. 4. Vessel or tissue bundle within diameter of 5mm can be cutted and coagulated with one operation.   Reference: http://live.futuretechvideo.com/live/page/370F5CC82FF9DA2FD1ED1488C286D94C?topicid=1318768266&shauid=zMrjiH-5w5LlFrlabAjfyg**&vprid=0&sharetstamp=1655971992454